C60 cwt Signals CZMk IV

[Gordon Yeo]

Phil

Thanks for posting the drawings for the rear light mounts, I'm sure I can read the dimensions as posted. I will have two separate rear lighting systems each mounted independently. Rather than use M-series lights I plan on using a trailer light package for the rear lights and do a little reverse engineering.

I took your advice and re-routed the oil pressure gauge line around the back of the engine away from the manifold heat.

Here is a picture of the lights that I have reconditioned and made leads for, I got the lenses for then at Acton. Thanks to Harry and Grant for the suggestions about LEDs, I've already been tip off about them.

Gord