Ford Blitz Restoration/Rebuild

hrpearce · #1 12-04-14, 23:13

Quote:

Originally Posted by Private_collector

He would receive a small fee for this. The lazy kids wouldn't have to 'waste' their time in line for lunch, and my Son would come home, having made a profit! Classic!

Greg didn't always make a money profit. He used to buy the lollies after lunch for the girls in his group and kept the change, no change meant they owed hin a cuddle, either way he was happy

Howard · #2 12-04-14, 23:20

The son of a former boss wagged school one cold morning, went to the local op-shop and paid $3 for a sandwich toaster. He then ran a lead from the gym to his locker, And charged $2 to toast sandwiches at lunch times. He was averaging $20 a day until discovered by the teaching staff, And was suspended. I have a few stories about this kid but I won't hijack this thread any further.
Cheers,
H

motto · #3 12-04-14, 23:28

Sounds like Greg has a fair amount of initiative and drive. He should do well.

David

Private_collector · #4 13-04-14, 00:27

Robert, sounds like your young fella has his head on right!

Hearing stories like that just crack me up!

Will certainly let you know when the visits to Kapooka occur. Just wish I had the truck finished. Think how embarassed my Son would be if his dad turned up 'in theme'.

Private_collector · #5 20-04-14, 00:19

MILITARY WITTICISMS

"A slipping gear could let your M203 grenade launcher fire when you least expect it. That would make you quite unpopular in what's left of your unit."-Army's magazine of preventive maintenance.

"Aim towards the Enemy."-Instruction printed on US Rocket Launcher

"When the pin is pulled, Mr. Grenade is not our friend.-U.S. Marine Corps

"Cluster bombing from B-52s is very, very accurate.The bombs are guaranteed to always hit the ground."-U.S. Air Force

"If the enemy is in range, so are you."-Infantry Journal

"It is generally inadvisable to eject directly over the area you just bombed."-U.S. Air Force Manual

"Whoever said the pen is mightier than the sword obviously never encountered automatic weapons."-Gen. MacArthur

"Try to look unimportant; they may be low on ammo."-Infantry Journal

"You, you, and you . . . Panic.The rest of you, come with me."-U.S. Marine Corp Gunnery Sgt.

"Tracers work both ways."-U.S. Army Ordnance

"Five second fuses only last three seconds."-Infantry Journal

"Don't ever be the first, don't ever be the last,and don't ever volunteer to do anything."-U. S Navy Swabbie

"Bravery is being the only one who knows you're afraid."-David Hackworth

"If your attack is going too well, your walking into an ambush."-Infantry Journal

"No combat ready unit has ever passed inspection."-Joe Gay

"Any ship can be a mine sweeper... once."-Anon

"Never tell the Platoon Sergeant you have nothing to do."-Unknown Marine Recruit

"Don't draw fire; it irritates the people around you."-Your Buddies

Private_collector · #6 20-04-14, 01:13

Well worth a read!
article-2195389-14BB9F0B000005DC-43_634x422.jpeg

http://www.warhistoryonline.com/feat...line-duty.html

Private_collector · #7 20-04-14, 13:15

While cleaning up at my Father In Laws place, we came across a curious, and very well constructed, metal frame, which was initially of unknown purpose. It is 2.4m (?8ft) long x 2.0m (6+ft) wide. A lot of work went into this, with weld around all sides of all joins. None of us knew this even existed, and no one recalls seing it being constructed! It is most definately a frame for the rear of a decent size utility vehicle. Odd though, the only vehicle he had already has a tray back, and I don't think he was considering changing that off.

After some prelimenary measurements, I believe this frame will fit the back of my truck with minimal modification. Certainly isn't too wide, and I do believe once the tool box & tyre carrier are installed, it will fit in nicely behind that, with little hang over (possibly < 150mm/6") at the rear. Many options have been considered for what to do about rear body, and with the discovery of this frame, I think this is my choice. It's too good to overlook, and it would be a shameful act to see it go to someone else, or possibly end up as scrap. My Father In Law was every bit the welder I knew I wouldn't be!

Prior to discovering this frame, we discovered a sizable pile of tongue & groove floorboards in one corner of the shed. We had no idea what these were for, as no renovations were planned, nor was there any other lumber anywhere around. The mystery depened when, upon closer examination, each length was seen to have a unique number written on one end. There was around 25 - 30 boards, from memory. Once we found the steel frame, the mystery was solved of course. The hardwood lengths were intended for the construction of the ute tray! Such was the thorough planning and execution of everything he did. When all the boards were lain roughly in their final order, I couldn't help notice that despite a lot of variation in the board colors, when in 'order' they looked to be in a nice pattern, with no two identical ones together. I will ensure they are fixed in their correct order, as was intended by the maker. Quite a nice touch to an otherwise mundane item which nobody will give much thought to. I intend to have the boards fine sanded (professionally) when secured in final position. Floor sander guy will probably think I have gone rather potty, but those of us in the family will know the full story.

Now you do too.

hrpearce · #8 20-04-14, 13:50

Tony your blitz will end up being an encyclopaedia of your family history.

jack neville · #9 09-05-14, 13:50

Quote:

Originally Posted by Private_collector

While cleaning up at my Father In Laws place, we came across a curious, and very well constructed, metal frame, which was initially of unknown purpose. It is 2.4m (?8ft) long x 2.0m (6+ft) wide. A lot of work went into this, with weld around all sides of all joins. None of us knew this even existed, and no one recalls seing it being constructed! It is most definately a frame for the rear of a decent size utility vehicle. Odd though, the only vehicle he had already has a tray back, and I don't think he was considering changing that off.

After some prelimenary measurements, I believe this frame will fit the back of my truck with minimal modification. Certainly isn't too wide, and I do believe once the tool box & tyre carrier are installed, it will fit in nicely behind that, with little hang over (possibly < 150mm/6") at the rear. Many options have been considered for what to do about rear body, and with the discovery of this frame, I think this is my choice. It's too good to overlook, and it would be a shameful act to see it go to someone else, or possibly end up as scrap. My Father In Law was every bit the welder I knew I wouldn't be!

Prior to discovering this frame, we discovered a sizable pile of tongue & groove floorboards in one corner of the shed. We had no idea what these were for, as no renovations were planned, nor was there any other lumber anywhere around. The mystery depened when, upon closer examination, each length was seen to have a unique number written on one end. There was around 25 - 30 boards, from memory. Once we found the steel frame, the mystery was solved of course. The hardwood lengths were intended for the construction of the ute tray! Such was the thorough planning and execution of everything he did. When all the boards were lain roughly in their final order, I couldn't help notice that despite a lot of variation in the board colors, when in 'order' they looked to be in a nice pattern, with no two identical ones together. I will ensure they are fixed in their correct order, as was intended by the maker. Quite a nice touch to an otherwise mundane item which nobody will give much thought to. I intend to have the boards fine sanded (professionally) when secured in final position. Floor sander guy will probably think I have gone rather potty, but those of us in the family will know the full story.

Now you do too.

Tony ,

Can you post a picture of the frame you found. I have a suspicion...

Jack