|
|
|
|
#1
22-05-14, 05:25
|
||||
|
||||
Euan is correct. Your clutch rod from pedal to pivot bracket is in backwards.
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer 
|
|
#2
22-05-14, 05:40
|
|||
|
|||
|
A simple error to make as the parts manual illustration pictures it installed the way Richie has it.
|
|
#4
22-05-14, 10:40
|
||||
|
||||
|
I wouldn't care I had it the other way then read the book illustrating it went the way I have put it.... Will take it to bits again hahahhaa
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#5
22-05-14, 11:19
|
||||
|
||||
|
Yeah, Lynn, the seat back bottom rail has not been out the machine, but looks to be a later fitting... I will check the brackets etc for part numbers, but basically by turning the handle at the end it tilts the base of the seat back and forward, I wondered if it had been a post war thing jerry's rigged, but there are remains of the gunners seat too.
The carrier is 1942 dated, and I am unsure as to when the mods from Mk1 to Mk2 began to filter through.
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
|
#6
22-05-14, 14:29
|
|||
|
|||
|
I'm waiting for Michael R. to explain that later production MkI*s were fitted with the MkII* seat back hardware.
It's probably not the case, that all the changes/ improvements were introduced at the same time. I would guess the introduction of the MkII* was more a collection of re-design features hitting the production line at one time, justifying the re designation to reduce the confusion in the parts supply and r&m instructions.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#7
22-05-14, 16:51
|
|||
|
|||
|
From my understanding all MK1* have the same seat style as Richie's
Lynn you are probably more familiar with the early style which has the two bars top and bottom same as Richie has on the top. This was the standard up until the MK1 not sure about a British MK1 compared to the * version. The Scout, Bren and LP1NZ will have the two bars and corresponding extra set of hooks on the div plate.
|
 |
|
|
Hybrid Mode
