Cooker tray for MkI*
Hanno hi,
The cooker tray for the MkI* (CTL 13251) is a metal tray made to fit the No.2 Cooker which is almost square. It has leather strap and buckle fixed to the side in a sleeve with the leather rivoted to it. The tray is mounted on two timber pieces (CTL 12525). Length of these pieces is the distance between the two fuel tank holder straps (approx. 13"L x 2"D x 1.5"W). On the underside of these two timber pieces are screwed metal plates (CTL 12527) which protrude about 1.5" from both ends, these plates being the same width as the timber (approx. 1.5"W x 3"L). The protrusions are for holding the tray in place by wedging them between the fuel tank strap and its felt lining. Timber pieces made most likely from Douglas Fir same as Firing Rests and Floor boards. Sorry I don't have any pictures or fixed dimensions, am working on these. Much can be ascertained from the various Parts Lists and Plans. I still need one for my MkI* but am still hunting for the correct No.2 Cooker to get the tray sizes from.
Nigel
|
13-10-04, 00:29
Threaded Mode