|
|
#27
09-08-14, 21:41
|
||||
|
||||
Quote:
2. Mechanization Circular No. 301 2nd. January, 1942. Mechanical Vehicles- Camouflage Disruptive Painting. Approval to paint all mechanical vehicles in disruptive camouflage. Basic colour of vehicles for use in Australia is Khaki Green No. 3 One coat only of disruptive paint is to be applied, either by brush or spray, on top of the basic colour, in either the following three-tone or two-tone designs. All edges are to be kept sharp, it may be necessary to paint the boundary between two colours to obtain sharp definition. The colour combinations employed: Three-Tone 1. Light Stone N. Light Brown P. Khaki Green J. 2. Light Green H. Khaki Green J. Black U. 3. Light Stone N. Light Green H. Khaki Green J. 4. Light Stone N. Khaki Green J. Dark Green M. 5. Light Stone N. Light Brown P. Basalt Red S.* Two-Tone 6. Light Stone N. Khaki Green J.* 7. Light Brown P. Khaki Green J.* The colour combination selected should approximate to the colours of the country in which it is expected the vehicle will operate. - For Australian Coastal areas use Sets No. 2, 3, 4, or 6 - For Australian Central and Northern Areas use Set No.5 or 7 - Set No.1 will merge under almost any circumstances. The presence of black indicates Set No.2 while the presence of red/brown indicates Set No.5 which suggests this carrier was re-camouflaged in the field upon relocating from Coastal to Central/Northern Australia. The sand/white line may be an artifact resulting from this change or perhaps misinterpretation of instructions. Following pics show correct application of 3-tone pattern. 134428 CARRIER 3'' MORTAR (AUST).jpg Snapshot 5 (7-05-2014 4-54 AM) - Copy.jpg
__________________
One of the original Australian CMP hunters. 
|
|
|
Threaded Mode