Our LRDG Chev

[Andrew H.]

Just a brief progress report for anyone interested. Despite not having posted here for a while, that does not indicate a lack of enthusiasm for our project. There has been nothing much to report, as we are still bogged down fabricating and painting our rear ammo body. This has taken much longer than we thought, for reasons I won't bore you with. We work on the truck nearly every weekend so there is no lack of commitment, but its coming together very slowly at present. Issues we have dealt with during winter include high winds (we are in an open-sided shed) and once we even found ourselves working in an inch of water!

Lately we have been deciding whether to glue the deck down with Sikaflex adhesive, which we understand is now widely used in truck-bed assembly, or to weld it in the normal way. In the end we decided not to use adhesive in case it created difficulties with the NZTA certification requirements. I will post again when there are some pictures to show our progress - maybe in two or three weeks.