![]() |
#14
|
|||
|
|||
![]()
The rubber grommet # 23 is a perfect fit for the large opening in the # 5 cover. It's the correct size fit for the F rod. but I don't think it would fit the cable going out to the mast.
If you are lucky enough to have both pieces use a good rubber or O ring lubricant (not ky HA HA), the grommet was good but the cover piece was starting to crack. Here's another question. I have the # 16 ZA 28542 and # 17 ZA 28543 control box for my 38 AFV installation, but I found another # 17 ZA 24891 box that is marked 510 not 38. Would that be for the CDN 510 set. Both of the first 2 boxes are tropicalized which is a good thing on the west coast as it's currently coming down in biblical sized buckets right now.
__________________
Roberta Jayne Melville CD II QJ MK I * universal carrier 1942 WLC Harley under restoration 1957 M38A1 jeep R.E.L. optical equipment Military manuals Field phones MK II 19 set (needs work) 4 MK III W-19 sets AN/PRC-9 CPRC-26 WS-29 componets WS-38 AFV WS-38 MK III WS-48 with generator WS-58 MK I MK V heliograph |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gasket clamp | Dave Schindel | The Carrier Forum | 4 | 07-02-12 06:43 |
Gasket patterns | Keith Webb | The Restoration Forum | 1 | 27-02-09 15:20 |
Carrier speedo cable and choke cable. | kevin powles | The Carrier Forum | 1 | 15-11-08 03:18 |
Inner windshield gasket | Chuck Anderson | The Restoration Forum | 0 | 23-10-08 21:59 |
Gasket question | Jordan Baker | The Restoration Forum | 6 | 26-12-05 03:57 |