Ford V8 exhaust manifold, RHS

[Hanno Spoelstra]

Here are some pictures I found of the "1937 - 1941 V8 Ford Exhaust Manifold 78-9430 Right - Fits passenger car and pick up. 1937, 1938, 1939, 1940, 1941"

Please note the outlet studs are in line with centerline of engine.

37-41 r 78-9430 pc584-500x500.JPG pc 600 78 9430 - 2-500x500 (1).JPG PC 600 78 9430 - 1-500x500.JPG 1937___41_Ford_E_4fa2ca73c9a97-500x500.jpg
p355 78-9430-500x500.JPG

[Jack Innes]

Hanno,

This company in California lists several of these manifolds available; http://www.reds-vintage-parts.com/ou...d-ford-exhaust

Jack

[Hanno Spoelstra]

Originally Posted by Jack Innes

This company in California lists several of these manifolds available; http://www.reds-vintage-parts.com/ou...d-ford-exhaust

Jack, thanks - that is where I found the pictures I posted above when googling for 78-9430

Sadly California is too far away for my needs - I will explore the more local leads I have now.

Thanks,
Hanno

[Lynn Eades]

Hanno, If the ones in the photo are correct, then as I recall, Joblot (USA) has one side, as NOS for $45.00. Might be worth the freight if it is the correct side.

[Hanno Spoelstra]

Lynn,

Took a while to find http://www.joblotauto.com. Interesting company, I did not know them. They list the 18-9430 version of the exhaust manifold, not the correct one for me.

But thanks!
Hanno

[John A. Rippingham]

Is this the one?

http://www.ebay.co.uk/itm/VINTAGE-FO...item1e9b2c1ed4

[Hanno Spoelstra]

Looks like it indeed, thanks John.

Have found a couple of local leads which I am going to pursue before going overseas.

Thanks,
Hanno

[rob love]

Originally Posted by Hanno Spoelstra

Lynn,

Took a while to find http://www.joblotauto.com. Interesting company, I did not know them. They list the 18-9430 version of the exhaust manifold, not the correct one for me.

But thanks!
Hanno

The 18-9430 is the old manifold from the 21 stud engines, but are important to us because they are also the manifolds used on the 221 85 horse engine used on Canadian Bren gun carriers. I am in need of a pair of these (left and right) for a project I am doing for 2PPCLI.

[Lynn Eades]

Sorry Hanno, I put you crook there. Of course I knew about them because of carriers, as Rob points out.

[Hanno Spoelstra]

Originally Posted by rob love

The 18-9430 is the old manifold from the 21 stud engines, but are important to us because they are also the manifolds used on the 221 85 horse engine used on Canadian Bren gun carriers. I am in need of a pair of these (left and right) for a project I am doing for 2PPCLI.

Well, then Lynn put you on the right track! The joblotauto offer sounds like a great deal.

Originally Posted by Lynn Eades

Sorry Hanno, I put you crook there. Of course I knew about them because of carriers, as Rob points out.

No worries Lynn, seems another flathead will benefit from it.

Hanno