|
|
|
|
#1
31-03-15, 08:45
|
||||
|
||||
The carrier has also been turned up side down which makes the exhaust, diff and wheel stations much easier to fit. I made 2 new muffler heat shields and welded them into place so it's all ready for the exhaust to be fitted.
|
|
#2
01-04-15, 09:33
|
||||
|
||||
|
I did some hunting today to find some mufflers with the round ends and drew a blank everywhere I went so I thought I would have a try at making some.
I found some 40mm thick plate and welded a locating piece of steel in the centre and used for the chuck to hold on to. I machined it to the shape I wanted and that is my top part of the press tool. the bottom part was obviously a female part. I just roughly put them in the press with some 1.2 steel that I cut in a bit of a circle and to my surprise  it actually did a neat compound pressing and to the size I need so now I can go ahead and make the mufflers. Happy Chappy 
|
|
#3
01-04-15, 09:47
|
|||
|
|||
|
nice job !
__________________
_______________________ 1941 mk1 mortar Carrier 1941 Mk1* Carrier 1942 Mk1* Carrier 1943 T16 Carrier 1945 Mk3 Dingo 1941 Mk3 Covenanter 1941 Mk4 Churchill AVRE (now sold) 1944 Mk6 Cromwell (now sold) 1952 Mk3 Centurion 1952 ARV Centurion 1952 ARV Centurion 1953 Mk3 Centurion (breaking)
|
|
#4
01-04-15, 11:41
|
||||
|
||||
|
great !!!
__________________
____________________________ Austin K30 1940 Austin AP8 1940 Austin 10hp G/YG "Tilly" Royal Enfield WD/CO 1942 British airborne trailer family Austin K2/Y Ambulance 1939 Austin K30 1940 Austin Champ 1954 ...
|
|
#5
01-04-15, 12:56
|
|||
|
|||
|
excellent work & craftmanship
Soon it will be Colin's Exhaust Shop...
Nice job and keep the pics coming
__________________
1943 Ford GPW Jeep "Follow Me" 1943 MBT trailer 1943 Dodge WC-57 Command Car 1943 Chev C60L Army Cargo Truck 1941 LP2 VR 731 Bren Gun Carrier 3" Mortar Carrying Under restoration: 1940 LP1 Bren Gun Carrier 194? 1 Ton Trl Ben Hur 1942 C15A with sunshine cabin MVPA 31338
|
|
#6
01-04-15, 16:29
|
|||
|
|||
|
I can see the orders coming in now
|
|
#7
08-04-15, 10:30
|
||||
|
||||
|
Have not been able to get much done in the last few days but found a bit of time today. I rolled a couple of tubes and prepped the ends and baffles ready for assembly.
|
 |
|
|
Hybrid Mode
