Vc 2047 lp2 - MLU FORUM

MLU FORUM

		MLU FORUM > MILITARY VEHICLES > The Carrier Forum
Vc 2047 lp2

PaperClip

colin jones Vc 2047 lp2 26-03-15, 11:40

PaperClip

colin jones Most of the smaller parts I... 26-03-15, 11:44

PaperClip

colin jones I have previously made just... 26-03-15, 11:50

hrpearce Will it be finished by the... 26-03-15, 11:58

Sean Mayo Hi Colin, you make it look... 26-03-15, 15:23

maple_leaf_eh Did you find the reassembly... 26-03-15, 18:42

colin jones Yes Robert, I'll have it... 26-03-15, 21:54

Matt Stephenson Hi Colin, Impressive work,... 27-03-15, 03:18

Lynn Eades Great stuff Colin. I love... 27-03-15, 07:34

PaperClip

colin jones Hi Matt, keep up the good... 28-03-15, 08:54

PaperClip

colin jones The piece is all welded in... 28-03-15, 09:02

PaperClip

colin jones All done and that's a bit of... 28-03-15, 09:09

PaperClip

colin jones And welded in place. Now time... 28-03-15, 09:12

super dave WOW I love seeing your... 29-03-15, 05:11

PaperClip

colin jones I managed to find half a day... 29-03-15, 10:36

PaperClip

colin jones I also had to remake the foot... 29-03-15, 10:42

PaperClip

colin jones My L/H engine support plate... 29-03-15, 10:48

PaperClip

colin jones Some of the pitting went over... 29-03-15, 10:52

PaperClip

colin jones I have finished the... 31-03-15, 08:34

PaperClip

colin jones All welded in and a lick of... 31-03-15, 08:40

PaperClip

colin jones The carrier has also been... 31-03-15, 08:45

PaperClip

colin jones I did some hunting today to... 01-04-15, 09:33

eddy8men nice job ! 01-04-15, 09:47

Radek great !!! :thup2: 01-04-15, 11:41

Darrin Wright excellent work &... 01-04-15, 12:56

super dave I can see the orders coming... 01-04-15, 16:29

PaperClip

colin jones Have not been able to get... 08-04-15, 10:30

PaperClip

colin jones I bent my exhaust parts and... 08-04-15, 10:35

jack neville Nice work Colin. Who knows... 08-04-15, 13:23

colin jones :) Perhaps sides for a Marmon... 08-04-15, 13:53

jack neville No they are made of timber.... 08-04-15, 16:39

Jon Bradshaw Nice work. 09-04-15, 05:17

super dave All I can say is WOW :cheers: 09-04-15, 06:37

PaperClip

colin jones Yes Jon, having the tools and... 10-04-15, 10:05

PaperClip

colin jones The diff is in place with... 10-04-15, 10:08

super dave True but without the skills... 10-04-15, 17:51

Michael R. Having the knowledge to... 10-04-15, 20:33

PaperClip

colin jones I had to remove my diff as I... 11-04-15, 09:56

PaperClip

colin jones The re enactors had the... 13-04-15, 12:23

PaperClip

colin jones All on and I had to make a... 13-04-15, 12:26

Lynn Eades You never muck around do you... 14-04-15, 13:01

PaperClip

colin jones Hi Lynn, yes I do muck around... 16-04-15, 11:25

PaperClip

colin jones Anyway they are repaired,... 16-04-15, 11:30

super dave Your moving right along and... 17-04-15, 05:55

Petr Brezina Excellent work! :note: 17-04-15, 08:50

Matt Stephenson Looks awesome! I'm enjoying... 17-04-15, 11:11

PaperClip

colin jones It's on its side now which... 18-04-15, 10:50

PaperClip

colin jones I needed to make the cam... 19-04-15, 10:58

PaperClip

colin jones You do need a panbrake folder... 19-04-15, 11:23

PaperClip

colin jones You also need a milling... 19-04-15, 11:27

PaperClip

colin jones I have done my floor plate... 23-04-15, 10:44

PaperClip

colin jones I would assume that these... 23-04-15, 10:46

Euan McDonald SA rail 23-04-15, 14:51

PaperClip

colin jones My gear change was 90 deg out... 26-04-15, 06:02

PaperClip

colin jones The front is just about... 30-04-15, 09:53

PaperClip

colin jones I had a good pattern of the... 02-05-15, 09:28

PaperClip

colin jones The other side of the battery... 02-05-15, 09:33

PaperClip

colin jones Here I made a set of press... 02-05-15, 09:39

PaperClip

colin jones The top part is the easy bit... 02-05-15, 09:44

PaperClip

colin jones Here's another press tool I... 02-05-15, 09:50

PaperClip

colin jones The fuel tank brackets are... 02-05-15, 09:55

PaperClip

colin jones The inside is as far as I can... 03-05-15, 08:23

gjamo A handy young man that Andrew... 03-05-15, 09:35

PaperClip

colin jones Yes Graeme, he's definitely a... 06-05-15, 09:53

PaperClip

colin jones I don't know how everyone... 12-05-15, 09:23

PaperClip

colin jones Tracks on and just a few tidy... 12-05-15, 09:27

jack neville Two dogs and a seven year old... 12-05-15, 17:57

Lynn Eades Jack, you've made a mistake.... 12-05-15, 21:15

PaperClip

colin jones Hey Jack, don't tell everyone... 19-05-15, 09:53

PaperClip

colin jones I also managed to get a bit... 19-05-15, 09:56

Lynn Eades You're an artist Colin ... 19-05-15, 10:31

jack neville You are obviously not a... 19-05-15, 16:10

PaperClip

colin jones Not much posting lately but... 27-06-15, 10:15

PaperClip

colin jones I made another radius former... 27-06-15, 10:20

PaperClip

colin jones The ends fitted quite well... 27-06-15, 10:40

PaperClip

colin jones Just to show how I make a lot... 27-06-15, 10:48

PaperClip

colin jones I prepared these earlier... 27-06-15, 10:51

SDeMocko Vision Shutters 28-06-15, 03:29

PaperClip

colin jones Hi Stephen, I never took any... 28-06-15, 10:10

PaperClip

colin jones I had some visitors today so... 28-06-15, 10:14

PaperClip

colin jones Wow, I can't believe it been... 30-12-15, 08:27

colin jones Hmm, for some reason I can't... 30-12-15, 10:39

Hanno Spoelstra For some reason the forum was... 30-12-15, 11:55

PaperClip

colin jones I used some solid rod,... 30-12-15, 12:35

Bob Carriere Wished you live closer..... 30-12-15, 17:46

colin jones Hi Bob, it wouldn't think you... 30-12-15, 22:38

PaperClip

Euan McDonald Tail lamp body 31-12-15, 00:53

Wayne Hingley Very nice workmanship Colin! ... 31-12-15, 01:13

Bob Carriere Thanks for the info..... 31-12-15, 03:18

Robert Bergeron Great work ! An... 31-12-15, 05:32

PaperClip

colin jones Morning and Happy New Year to... 02-01-16, 22:30

PaperClip

colin jones I gave both pieces a clean up... 02-01-16, 22:35

Michael R. Nice work Colin. Best wishes... 02-01-16, 22:40

jack neville Nice work Colin. That press... 03-01-16, 03:14

colin jones Thankyou Michael and yes Jack... 03-01-16, 04:07

PaperClip

colin jones Being Sunday I managed some... 03-01-16, 10:09

PaperClip

colin jones I got all the corners rounded... 03-01-16, 10:14

Wayne Hingley Nice looking results Colin. ... 03-01-16, 16:06

PaperClip

colin jones Thankyou Wayne and the... 04-01-16, 09:24

PaperClip

colin jones I just thought I would add a... 04-01-16, 09:40

PaperClip

colin jones I'm now up to making the... 09-01-16, 10:54

PaperClip

colin jones There is so many different... 09-01-16, 11:01

PaperClip

colin jones I should have done a few more... 09-01-16, 11:10

PaperClip

colin jones After fitting the tooling to... 09-01-16, 11:15

PaperClip

Ron Pier Mine was also made in... 09-01-16, 17:31

PaperClip

colin jones Ron, that would make it a lot... 13-01-16, 10:41

Ron Pier Yes indeed Colin, my whole... 13-01-16, 16:51

PaperClip

colin jones I have just made the earth... 17-01-16, 08:01

PaperClip

colin jones It can be a bit tricky... 17-01-16, 08:09

Petr Brezina As always - great job! 17-01-16, 09:30

super dave Nice, Thanks for the tech tip. 17-01-16, 19:05

Lynn Eades Colin, What is the source of... 17-01-16, 20:09

colin jones Thankyou all, and Lynn sorry... 18-01-16, 02:41

Ian Fawbert Hi Colin. The copper... 18-01-16, 03:57

PaperClip

colin jones Ian, I did blast the ends... 20-01-16, 11:37

super dave Hello Colin, Do you mind... 20-01-16, 17:28

Lynn Eades It's a Mackay brand mount... 20-01-16, 18:45

Bob Carriere Repros on EBay 20-01-16, 19:29

colin jones Hi All, yes they are from... 20-01-16, 21:16

Prev

Previous Post

Next Post

Next

#11

Old

19-05-15, 10:31

Lynn Eades Lynn Eades is offline

Lynn Eades is offline

Bluebell

Join Date: May 2003

Location: Tauranga, New Zealand

Posts: 5,541

Default

You're an artist Colin

__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT +2. The time now is 13:55.