Round hatch roof holes

[Jordan Baker]

Thanks for the picture. It helps me figure out what is missing.

Phil, thanks for the link.

Would it be possible to get some measurements on the angle iron rain guards? Also I the curved strip with the 4 hole, does it follow the same radius as the hip ring?

[Phil Waterman]

Pattern 13 Front Hatch/Hip Ring Details
ring4.jpg ring3.jpg

ring2.jpg hatchwoodring.jpg

insidering.jpg
Wooden spacer looks to be heat bent oak it is 1-1/16th" in width. At the (looking at picture) 12 & 6 o:clock position it is 1-1/8th" thick, at 3 o:clock it is 2-1/2" thick and at 9 o:clock it is 1/2"thick


These pictures are from http://canadianmilitarypattern.com/Posting.html



The little rain diverters are light gage sheet metal.

Cheers Phil

[Jordan Baker]

Thanks.

What are the dimensions of the rain diverters? I can make them easily enough.

[Phil Waterman]

Hi Jordan

Just walked out to the shop and measured them they are 4 inches long and 3/4 of inch on the sides.

Cheers Phil

[Jordan Baker]

Thanks very much.