Heads Up: Expressions of interest B set antenna bases

[Jim Burrill]

Richard, I have one with the metal top, but base is torn off. No center conductor. Is it worth sending over? Or just cut the metal top off to send?

I have another complete, but so limp, the antenna leans over to a 50 degree angle! (reminds me of something else, but I can't quite get my hands around it...)



I have another on one of the clamps for emergencies that seems sort of brittle...

And another still in the wrapper.

I am thinking to swap the clamp one for the saggy one and send that over. Just the metal bits. Might as well keep the rubber for later re-use for a display or such.

Have you had good luck making 100% complete new ones? If so, how much?

WOuld like 2.

And I keep the complete ones here for rainy days...

Jim

[RichardT10829]

Yes Ian and Lauren both have 100% working repro, I am short of PYE connectors to keep knocking them out. Ian sure they will give honest feedback on what they received.

I can resurrect originals no problem just send me what you got and what you want done.

The Guinea pigs were sold workers for £65 each (totally undersold myself as the work involved is ridiculous)

Drop me an email or message on FB and we will work something out I am sure.

[Chris Suslowicz]

I have Pye connectors if you need them.

(Rather cheaper than the stupid prices on eBay, too!)

Chris.

[RichardT10829]

Ok. John, Eric, and Perry. Yours have all been dispatched.........I have finally caught up let me know if they are up to your standards..

I have two coming out of the moulds shortly which will be spares for grabs.

Jim

Pop your broken ones in the post mate, now is a good time as I have momentum hahahahaha.

[Jim Burrill]

Thanks for the reminder Richard! Will be in the Garage working on Lance's carrier today anyway.

[lssah2025]

Don't forget I have sent a few messages and post about mine too..

[Eric R.]

Originally Posted by RichardT10829

Ok. John, Eric, and Perry. Yours have all been dispatched.........I have finally caught up let me know if they are up to your standards..

I have two coming out of the moulds shortly which will be spares for grabs.

Jim

Pop your broken ones in the post mate, now is a good time as I have momentum hahahahaha.

Thanks Richie!

Now anyone know where to get the 4 small screws to attach it to a base?

[RichardT10829]

I will chuck some in for you

I need you to settle up for the postage though :-)

On the posts I have had access to, all have been 4ba screws, two main types were used, pan head slot drive, or cheese head slot drive.

[Eric R.]

Originally Posted by RichardT10829

I will chuck some in for you

I need you to settle up for the postage though :-)

Sent it to you this morning.