Wanted: Gen pulley for lp2 carrier

[Dale Jordan]

Thanks Darrin .Here are some more photos I thought this would be easy . Any way this is the gen and pulley as Colin sent me with the motor not sure if it was the one that It run with on the motor , seams to be the same V grove as the water pumps and lines up OK . 118 mm across . back of fins to centre of inside pulley is around 20 mm as fins are broken I'm sure its the pulley with key-way and 17 mm shaft I'll know soon when my Auto guys get back to me . Dale









Number is 78- 10130- 0

[lynx42]

Hi Dale,

Thanks for your phone call. I had a look in the shed and this is what I found.

scoutcar diff 006.jpg scoutcar diff 008.jpg scoutcar diff 007.jpg scoutcar diff 009.jpg scoutcar diff 010.jpg

Hope it is what you are after. Knowing what you have already gone through, I won't pull it apart but send the whole genny and pulley to you.

I will get a freight price from 'pack and send' for you if that is what you want to do.

No, I don't want anything for it. I have been helped by many on MLU so it is my turn to reciprocate.

Regards Rick.