Engine oil cooler feed line insert.

[Tony Wheeler]

Originally Posted by Lynn Eades

Tony, I assume that the filter assy in the CMP is a bypass filter, not a full flow type?

Yes Lynn, standard bypass filter assembly with return pipe to oil pan. That full flow system described in the Ford manual is a complete mystery to me. Stillborn idea perhaps...?

Originally Posted by Lynn Eades

In the carriers there is an unrestricted flow through the cooler and back to the galleries. They are fitted with that type of bypass valve which is supposed to bypass the cooler if the oil is cold and thick.

Yes, it's the same part in the diagram, intended to protect against blocked filter.

Originally Posted by Lynn Eades

I have just recently installed my crank and am too late for mods now.

No mods necessary for full flow filtration, just a kit for the oil pump. Simples!

http://www.flatheadspeedandmachine.c...sion-kits.html