Lynx II, hull # 4225

[lynx42]

Originally Posted by Peter Duggan

Rick,

Thank you very much for posting your pictures of the radiator splash shield. A picture is worth more than a thousand words. The only visual reference I had been able to find was a sketch in the Lynx operators manual. No references at all in the maintenance manuals.

If you have ready access to your shield, a sketch and dimensions of the domed access cover, would be great.

Thanks again. Made my day. Peter

Hi Peter,

Took some measurements for you.



LYNX BITS 002.JPG

LYNX BITS 005.jpg


In the first on, the calipers are about 1/4" too wide as is the measurement on the tape, so take off 1/4". (5 1/2 not 5 3/4').


LYNX BITS 010.JPG

LYNX BITS 011.JPG

Dome height is 2 1/5".

More to come.