25 Pounder info needed.

[rnixartillery]

Originally Posted by Euan McDonald

Tony, pump looks fantastic but it should have been blue.
I have a box that is marked pump that looks like it straps to the trail but I don't think it holds the hand pump. any clues welcome.

This box carries ALL of the recouperator pumps ( N05,N02 liquid and N02 screw ), gauge, spare lens box etc and was issued to and serviced a battery of guns ,it was generally carried in one of the limbers in the tray.
A very rare box indeed !

Rob................rnixartillery

[jack neville]

I have one of these boxes including all the interior furniture however it has been disassembled and I can't see how it goes back together. Any pictures Rob?

My pump handle is blue too Euan.

[Private_collector]

A cartage deal for my 25pr parts is all but struck now, and I'm relieved to say the parts will come to me, as opposed to me going to them. Timing will be to suit the carrier. He quoted a quite good price, so I'm happy to fit in with his travels.

Once i have my pieces, I will REALLY need to sort workshop space to setup for fabricating the trails. I have a plan.

Still a great number of parts (or portion thereof) to be acquired. The search continues.

If you have anything 25pr for sale, especially parts for trails, carriage, and cradle, do let me know, please.

Thanks

[Euan McDonald]

If the pump box went in the limber stores tray were did the spare sight box go?

[Private_collector]

I imagine it's time to reveal a few things happening behind the scenes.

You may recall I made a tentative set of skeletal trails, needing sides fabricated and welded into place. Well, they've progressed no further, and for a very good reason. Before going ahead with that, I need a mass of accurate measurements and some original brackets which would be extremely difficult to copy (for me, at least). Earning my extreme gratitude, a fellow MLU member in UK put me in touch with a gentleman here in Australia, who has a front section (firing front) of an original 25pr trails set he was prepared to sell me. The section had been used as a range target at some point, and seems to have been on the receiving end of a jolly intense game of 'Cop Your Whack'. And quite a few whacks were copped. Many impacts were delivered with the gun in profile, and those shots have travelled through, missing most of the parts I want to use.
P1100033[2]-1.jpg P1100020[2](1)-1.jpg
The portion that the carriage sat upon remains largely intact, needing only some cosmetic work to return to ideal condition. Apparently there is still some shell shrapnel inside that area, and I want to salvage it before welding up the damage. Exactly how much of the original trails length I will retain, I cannot say at this point, though my replica will portray a welded trail gun.
P1100049[2]-1.jpg
Accompanying the trails section, is a group of smaller pieces which include another trail portion with a platform securing handle, and the fitting which I understand a pneumatic pump would have sat when being used.
P1100015[2].jpg
A most exciting piece, is shown in the following image. This carriage side piece, though supremely attacked by tin-worm, is precisely what i need to have. It will allow me to form up exact copies of my own. Reversing the jig will ensure left and right sides are precisely alike. Once two new sides are fabricated, I will then remove the portion that holds elevation gear, and weld it onto the new left hand side. I will need to find another bearing housing block for the cradle. Making another of those is out of my abilities. The sight attachment area will ultimately be salvaged too.
P1100030[2]-1-1.jpg

The above parts are yet to arrive, but they have been paid for and shipping co. has been chosen. It's now a matter of when they arive. That could be several weeks yet.

The piece in my NEXT post, will be received considerably sooner.

[Private_collector]

I'm grateful for every small piece I get. Sometimes a piece is not so small. Right out of the blue came offer to purchase a part which i could scarsely imagine finding. Ever. I missed one of these on ebay 2 to 3 years ago, and never seen another one since. Until now. Another example of MLU member/s to the rescue.
IMG_7453.JPG
IMG_7454.JPG

Friday morning I leave for an interstate trip to bring the platform home.

Now you understand why some of the brackets and attachments on the blasted trails section are so desirable!

If anybody has the ground anchor/spade end of trails set for sale, PLEASE let me know.
I'll get a full gun eventually. A lot of that is thanks to you fellow MLU members.

PS: I've actually been offered a genuine barrel and breach assembly, but this could be a step too far, I feel.

[Phillip]

Hey Euan,

Isn't this my old firing platform? Good to see it has not even been washed.