VICKERS MK6B's resto - MLU FORUM

MLU FORUM

		MLU FORUM > MILITARY VEHICLES > The Armour Forum
VICKERS MK6B's resto

PaperClip

colin jones VICKERS MK6B's resto 17-10-16, 03:56

colin jones Between the two tanks I have... 17-10-16, 04:03

Lynn Eades Great to see you getting into... 17-10-16, 06:25

Rob Dyba Glad they are in your hands... 17-10-16, 09:26

PaperClip

colin jones Hi Lynn, yes it is about time... 17-10-16, 10:31

PaperClip

colin jones A couple of the seats and I... 17-10-16, 10:33

Ben Looking forward to seeing... 17-10-16, 13:00

eddy8men a rare beast for sure. good... 17-10-16, 23:32

jdmcm WOW....how cool is that? Such... 18-10-16, 05:23

PaperClip

colin jones I have spent the morning... 18-10-16, 05:39

jack neville A nice win to start with... 18-10-16, 08:20

Rob Dyba Hi Colin, If you have the... 19-10-16, 07:11

colin jones Hi Jack, this is indeed a... 19-10-16, 10:03

PaperClip

colin jones Hello one and all. :) I'm... 17-12-16, 06:19

PaperClip

colin jones You can see the damage that... 17-12-16, 06:22

PaperClip

colin jones I resurrected my poor old... 17-12-16, 06:28

PaperClip

colin jones It certainly shows up the... 17-12-16, 06:32

PaperClip

colin jones The other photo's were taken... 17-12-16, 06:38

PaperClip

colin jones A few more strengthening... 17-12-16, 06:41

PaperClip

colin jones I tried a thinner piece first... 17-12-16, 06:49

Wayne Hingley Very impressive work as usual... 17-12-16, 15:53

PaperClip

colin jones Thanks Wayne, I pressed out... 18-12-16, 01:45

PaperClip

colin jones It's a bit hard to get much... 24-12-16, 10:07

PaperClip

colin jones I am starting at the back and... 24-12-16, 10:11

PaperClip

colin jones I'm glad Xmas is over and I... 28-12-16, 08:14

PaperClip

colin jones A little bit more and I'll... 28-12-16, 08:16

Rob Dyba Looks like the carrier... 28-12-16, 08:25

PaperClip

colin jones Yes Rob, I think i've... 29-12-16, 11:22

PaperClip

colin jones I am so very lucky to have... 29-12-16, 11:24

PaperClip

colin jones Once I have the top frame... 29-12-16, 11:26

PaperClip

colin jones Quite a good day today as I... 31-12-16, 11:12

PaperClip

colin jones I will have a lot of rivets... 31-12-16, 11:14

PaperClip

colin jones That's about all the side... 02-01-17, 10:58

PaperClip

colin jones I gave my son Andrew a job to... 02-01-17, 11:01

Howard Colin Jones 05-01-17, 10:14

PaperClip

colin jones Come on Howard, be nice now!... 05-01-17, 10:49

PaperClip

colin jones I'm ever so glad to have an... 05-01-17, 10:51

PaperClip

colin jones I had to put a hole in the... 05-01-17, 10:55

PaperClip

colin jones A test fit and it's all good,... 05-01-17, 10:58

Howard Colin Jones 06-01-17, 14:17

PaperClip

colin jones I'm having to make the cast... 08-01-17, 11:20

PaperClip

colin jones I made the end flange, welded... 08-01-17, 11:23

PaperClip

colin jones I needed an accurate distance... 08-01-17, 11:30

super dave Looking good, I love to watch... 09-01-17, 07:21

PaperClip

colin jones Thankyou Dave, you can't beat... 09-01-17, 11:47

Ryan Looks like it's coming... 09-01-17, 12:07

Petr Brezina Excellent workmanship! :thup: 09-01-17, 12:47

PaperClip

colin jones Yes Ryan, this is some really... 10-01-17, 10:54

PaperClip

colin jones The top section has a doubler... 10-01-17, 10:57

David Herbert My grandfather had me working... 10-01-17, 11:33

Alex van de Wetering Lovely work Colin! As others... 10-01-17, 21:28

David Dunlop Colin. Are those internal,... 11-01-17, 05:18

colin jones Thanks Alex, I will document... 11-01-17, 10:24

PaperClip

colin jones The part I made today is at... 11-01-17, 10:31

PaperClip

colin jones Some parts I just have to cut... 11-01-17, 10:35

PaperClip

colin jones For a smallish plate to make... 11-01-17, 10:38

PaperClip

colin jones That's the top part of it... 11-01-17, 10:43

Frantisek Nachlinger ..well said. Great thread! 11-01-17, 12:55

PaperClip

colin jones Thankyou Frantisek! I did... 16-01-17, 10:48

PaperClip

colin jones Time for the other side which... 16-01-17, 10:57

PaperClip

colin jones Just some more of the same... 16-01-17, 11:00

PaperClip

colin jones That's all of the upper... 16-01-17, 11:02

PaperClip

colin jones And a shot of the inside.... 16-01-17, 11:07

Howard progress 16-01-17, 11:27

lynx42 Have you seen this one,... 25-01-17, 05:30

Robin Craig This thread is a delight to... 25-01-17, 10:56

jack neville Amazing work Colin. Have you... 16-01-17, 12:43

colin jones Thanks jack, I did years ago.... 16-01-17, 21:31

Bob Carriere What is your next project???? 17-01-17, 03:37

Dave Mills Amazing work, machining down... 17-01-17, 07:18

Lynn Eades Colin, back to Jack's... 17-01-17, 10:29

PaperClip

colin jones Thankyou one and all! Lynn,... 18-01-17, 01:54

PaperClip

colin jones I welded the graft plates and... 18-01-17, 07:25

PaperClip

colin jones There were some support... 18-01-17, 07:27

PaperClip

colin jones After I made the jig it was... 18-01-17, 07:31

jack neville Looking good Colin. I'm glad... 18-01-17, 08:18

PaperClip

colin jones Thanks Jack, there is a lot... 20-01-17, 08:21

PaperClip

colin jones The bracket are for shovel,... 20-01-17, 08:24

PaperClip

colin jones I also cleaned up the other... 20-01-17, 08:27

maple_leaf_eh Let's not lose sight of the... 23-03-17, 13:46

PaperClip

colin jones Yes Terry, very true, they... 24-03-17, 23:26

PaperClip

colin jones I am well documenting this... 24-03-17, 23:31

jack neville What is the plan to... 24-03-17, 23:51

David Dunlop What type of alloy is the... 25-03-17, 01:49

colin jones Yes jack, i'm in the process... 25-03-17, 05:12

Lynn Eades Colin, is it possible there... 25-03-17, 07:10

colin jones Hi Lynn, as far as I know... 25-03-17, 22:22

PaperClip

colin jones The pulldown is now complete... 26-03-17, 05:31

PaperClip

colin jones After going through the bits... 26-03-17, 07:26

Howard Jigsaw with missing pieces 26-03-17, 08:41

Lynn Eades And me Howard. :salute:... 26-03-17, 11:39

PaperClip

colin jones Howard/Lynn, I wouldn't go... 27-03-17, 06:10

PaperClip

colin jones I will make a self aligning... 27-03-17, 06:12

Mike Cecil Hi Colin, This may have... 27-03-17, 16:55

David Dunlop Interesting post, Mike. I... 27-03-17, 21:35

colin jones Interesting Idea Mike, I have... 28-03-17, 12:25

Petr Brezina Good luck Colin, incredible... 28-03-17, 13:26

Russ Gregg What an incredible project, I... 28-03-17, 15:08

David Herbert Well put Russ ! I would... 28-03-17, 15:58

Bob Carriere Impressed.....absolutely... 28-03-17, 16:25

Russ Gregg I have designed motorcycle... 28-03-17, 21:35

colin jones Thank you all for your words... 28-03-17, 22:05

PaperClip

colin jones I have started with the end... 30-03-17, 04:18

PaperClip

colin jones There is one thing I can... 30-03-17, 04:23

PaperClip

colin jones I am quite happy with my... 01-04-17, 05:15

PaperClip

colin jones I thought I would show you... 01-04-17, 05:19

PaperClip

colin jones With this method of curving,... 01-04-17, 05:29

jdmcm So let me get this straight... 02-04-17, 07:00

colin jones Hi John, well lets say, I'm... 02-04-17, 12:23

Matt Stephenson Hi Colin, Very, very... 02-04-17, 12:32

Hanno Spoelstra Colin, I am amazed by... 02-04-17, 12:41

Robin Craig Among the many things this... 02-04-17, 14:12

colin jones Well, all I can say is... 02-04-17, 22:40

PaperClip

colin jones This part is the centre of... 05-04-17, 03:35

PaperClip

colin jones Obviously the location of the... 05-04-17, 03:39

PaperClip

colin jones The gear that fits into the... 05-04-17, 03:42

PaperClip

colin jones The housing is complete and... 05-04-17, 03:44

Lynn Eades Colin, it looks to me that... 05-04-17, 07:31

David Herbert I agree with Lynn, almost... 05-04-17, 10:24

David Herbert Just been looking at the... 05-04-17, 10:38

colin jones Lynn, I think you hit the... 05-04-17, 13:14

Frantisek Nachlinger This thread is a real... 05-04-17, 15:26

PaperClip

Richard Farrant Hi Colin, The gear in the... 05-04-17, 21:47

David Dunlop Hi Colin. Since the... 05-04-17, 22:58

Richard Farrant Hi David, see the attached... 05-04-17, 23:07

David Dunlop Hi Richard. I don't doubt... 06-04-17, 04:01

Richard Farrant Hi David, The Tank Museum in... 06-04-17, 10:16

Lynn Eades I now concur with Richard... 06-04-17, 12:36

colin jones Thankyou Richard, you cleared... 06-04-17, 13:23

Richard Farrant Hi Colin, Good to hear you... 06-04-17, 18:48

Mike Cecil No Mechanic?? 06-04-17, 19:28

PaperClip

colin jones Thanks Mike. I have just done... 07-04-17, 04:52

PaperClip

colin jones Well it's looking half... 07-04-17, 05:02

Petr Brezina You know what Colin? I was a... 07-04-17, 08:50

PaperClip

colin jones Thankyou Petr. Now that I... 07-04-17, 09:09

PaperClip

colin jones I have now got the main box... 09-04-17, 09:07

PaperClip

colin jones Everything is fitting and... 09-04-17, 09:10

PaperClip

colin jones Such a pain :( I just ran out... 09-04-17, 09:12

Lynn Eades :note: :note: :note: :salute:... 09-04-17, 10:28

Russ Gregg I am quite capable with a... 09-04-17, 11:09

colin jones Hi Lynn, yes as a matter of... 09-04-17, 11:49

Alex van de Wetering Colin......awesome work! I am... 09-04-17, 23:29

PaperClip

colin jones Thankyou Alex, I too am... 10-04-17, 12:44

PaperClip

colin jones I thought this part was going... 10-04-17, 12:46

PaperClip

colin jones I won't weld this part in... 10-04-17, 12:48

David Dunlop It's fascinating, Colin,... 10-04-17, 15:13

motto Looked at in isolation the... 11-04-17, 02:25

Lynn Eades On a visit to Colins, he... 11-04-17, 08:30

Tony Mathers Most Tank manufacturers of... 11-04-17, 13:19

Grant Bowker Use of aluminum might be for... 11-04-17, 15:51

Richard Farrant The gearbox casing is quite... 11-04-17, 21:43

colin jones I don't think it would have... 11-04-17, 23:34

Tony Smith :eek: Understatement? ... 12-04-17, 04:09

PaperClip

colin jones I have now had the gears in... 12-04-17, 05:17

PaperClip

colin jones I also put the side bearing... 12-04-17, 05:19

PaperClip

colin jones Well that's it!! i've welded... 12-04-17, 05:26

super dave Again WOW, I think that only... 12-04-17, 06:53

Russ Gregg A hundred years from now this... 12-04-17, 13:53

Mike Cecil ....Unless Colin does what... 12-04-17, 17:21

PaperClip

colin jones Thankyou Dave, but I think... 13-04-17, 11:59

PaperClip

colin jones These two pieces are 1" thick... 13-04-17, 12:02

jack neville It will be an interesting... 13-04-17, 16:53

PaperClip

colin jones I set my original box on my... 14-04-17, 07:34

PaperClip

colin jones It is now welded and just... 14-04-17, 07:36

PaperClip

colin jones I missed a couple of welds... 14-04-17, 07:39

PaperClip

colin jones Almost finished all the holes... 15-04-17, 10:08

David Dunlop When you add your data plate,... 15-04-17, 13:42

PaperClip

colin jones Yes Dave, unfortunately I'm... 16-04-17, 03:38

PaperClip

colin jones Well that's about it for... 17-04-17, 06:11

PaperClip

colin jones I am really happy with my... 17-04-17, 06:18

PaperClip

colin jones I have to say that i'm ever... 17-04-17, 06:24

David Dunlop Looks fantastic, Colin. Well... 17-04-17, 11:34

PaperClip

colin jones Thankyou Dave, I will use... 18-04-17, 10:30

Howard Idea 18-04-17, 10:55

hrpearce My wild guess is; mount it in... 18-04-17, 10:59

PaperClip

colin jones The box is totally finished... 18-04-17, 11:23

Chris Collins A wild guess.... 18-04-17, 11:50

colin jones Chris, you got the prize. It... 18-04-17, 12:25

charlie fitton Damn! I didn't even see the... 18-04-17, 13:06

Wayne Henderson box 18-04-17, 14:15

PaperClip

colin jones Thanks Wayne, I'm pretty... 21-04-17, 13:02

PaperClip

colin jones It's incredible that all the... 21-04-17, 13:11

Tony Smith I think you need to get a... 21-04-17, 14:13

Lynn Eades Colin, Can you put up a... 21-04-17, 20:47

PaperClip

colin jones I already have a hobby thanks... 22-04-17, 05:59

PaperClip

colin jones Hi all, I haven't forgotten... 17-05-17, 13:25

PaperClip

colin jones I have just done a bit on the... 17-05-17, 13:30

PaperClip

colin jones The centre section was quite... 17-05-17, 13:35

PaperClip

colin jones The front of the second... 25-05-17, 13:43

PaperClip

colin jones The hull was seriously out of... 25-05-17, 13:47

PaperClip

colin jones I took both Vickers out of my... 27-05-17, 10:42

PaperClip

colin jones That's one floor off and one... 27-05-17, 10:46

PaperClip

colin jones Interesting rear suspension... 27-05-17, 10:51

Lynn Eades Corten type floor going in... 27-05-17, 11:28

David Dunlop Looks like, apart from the... 27-05-17, 11:48

colin jones Sorry Lynn but, what is a... 27-05-17, 12:55

David Dunlop Curiosity question, Colin. ... 27-05-17, 15:30

Lynn Eades Colin, I bought a sheet... 27-05-17, 22:31

Andrew Rowe Floor 27-05-17, 22:33

colin jones David, there is a lot of... 28-05-17, 00:54

Tony Smith Corten is the steel used in... 28-05-17, 09:27

PaperClip

colin jones Well, I won't forget Corten... 28-05-17, 11:29

PaperClip

colin jones Again the port power was... 28-05-17, 11:33

PaperClip

colin jones I have now got both of the... 31-05-17, 11:42

PaperClip

colin jones The floor of the other one is... 31-05-17, 11:49

PaperClip

colin jones They will both be ready for... 31-05-17, 11:51

James P Mr. Jones, you are doing some... 01-06-17, 14:51

BradB He's not even fixing a tank. ... 01-06-17, 21:42

PaperClip

colin jones I have completed the hull... 09-06-17, 12:56

jack neville Looking good Colin. 09-06-17, 13:26

PaperClip

colin jones Hi jack, even better now with... 11-06-17, 11:12

lynx42 Excellent Colin, I see there... 11-06-17, 11:59

colin jones Hi Rick, no that is how it... 11-06-17, 12:03

lynx42 Thanks Colin, shows how much... 11-06-17, 12:28

PaperClip

colin jones I thought I would put up some... 12-06-17, 03:45

David Dunlop Colin, they both look so tidy... 12-06-17, 04:45

Howard Progress 12-06-17, 08:18

James P Good lord you folks down... 12-06-17, 12:45

Mike K hardening 12-06-17, 14:16

Lynn Eades I made mine from 4140 and... 12-06-17, 20:17

colin jones Hi Mike, Lynn, I'm familiar... 12-06-17, 22:53

jack neville When I rebuilt my Marmon... 13-06-17, 00:46

PaperClip

colin jones Jack, I'm sure your lathe... 14-06-17, 05:48

PaperClip

colin jones These brackets are relatively... 14-06-17, 05:51

Howard Wow 14-06-17, 11:41

Tony Smith No.... Wizardry. Makes me... 14-06-17, 16:23

Mike Cecil Hi Colin, Outstanding job.... 14-06-17, 17:09

David Dunlop Colin. I love watching how... 14-06-17, 17:43

colin jones Thankyou for your comments.... 14-06-17, 23:06

Mike Cecil Thanks Colin, I appreciate... 15-06-17, 00:24

PaperClip

colin jones Hi Mike, interesting thought... 15-06-17, 05:10

Mike Cecil Thanks Colin, I appreciate... 15-06-17, 05:31

PaperClip

colin jones I need some more 5/16 rivets... 18-06-17, 11:13

PaperClip

colin jones There is a combination of... 18-06-17, 11:16

Lynn Eades For those that don't know,... 18-06-17, 12:22

David Dunlop Wow, Colin, that is an entire... 18-06-17, 13:21

Mike Cecil Lynn, Good point regarding... 18-06-17, 19:54

Lynn Eades Mike, thanks for the info. my... 18-06-17, 22:30

colin jones David, yes that was an epic... 18-06-17, 22:51

Lynn Eades For an attempt at clarity:... 18-06-17, 22:54

PaperClip

colin jones Here's a few pics of the... 19-06-17, 03:04

PaperClip

colin jones Now this raises an... 19-06-17, 03:11

Mike Cecil Colin, Tanks were normally... 19-06-17, 03:21

colin jones Mike, I think you have... 19-06-17, 08:18

Andrew Rowe Wheels 19-06-17, 08:35

PaperClip

colin jones Hi Andrew, a very interesting... 30-06-17, 06:00

PaperClip

colin jones As you can see, I flipped... 30-06-17, 06:06

Lynn Eades Colin, what happened to Bob... 30-06-17, 08:21

David Dunlop Looking a bit like a 1930's... 30-06-17, 08:26

colin jones Lynn, I think Hugh Davis got... 30-06-17, 10:36

James P True, try posting some... 30-06-17, 13:01

Lynn Eades Hi Colin. What is wrong with... 01-07-17, 01:49

colin jones James, I might just do that... 01-07-17, 08:37

Mike Cecil 'Happy wife .... happy life!'... 01-07-17, 16:05

PaperClip

colin jones These couple of pieces are... 02-07-17, 11:20

PaperClip

colin jones It must be surrounded by some... 02-07-17, 11:23

PaperClip

colin jones Being sunday and I'm... 02-07-17, 11:28

Mike K 6 wheeler lorry 02-07-17, 13:12

Tim Lovelock Hi Colin, Following your... 03-07-17, 01:22

David Dunlop I wouldn't think a rubber... 03-07-17, 02:26

PaperClip

colin jones Mike, there is one of those... 03-07-17, 08:55

PaperClip

colin jones I was fortunate to be able to... 03-07-17, 08:59

PaperClip

colin jones The door that has the repair... 03-07-17, 09:04

PaperClip

colin jones I thought I would share a... 04-07-17, 02:57

PaperClip

colin jones I had to make two sets of... 04-07-17, 08:17

PaperClip

colin jones I was ever so lucky to get a... 04-07-17, 08:20

PaperClip

colin jones Just an update at my... 12-07-17, 10:03

PaperClip

colin jones I'm also ready to turn the... 12-07-17, 10:06

David Dunlop Nice to see them both finally... 12-07-17, 15:03

James P Amazing work and problem... 13-07-17, 02:23

PaperClip

colin jones Yes David it is and very... 16-07-17, 10:10

PaperClip

colin jones I need to test fit and drill... 16-07-17, 10:13

PaperClip

colin jones Axles fitted with the help of... 16-07-17, 10:24

colin jones I forgot to resize some pics... 16-07-17, 10:25

PaperClip

colin jones I just posted one and the... 16-07-17, 10:30

PaperClip

colin jones I thought I would share this.... 18-07-17, 03:07

James P Again, great stuff and when... 18-07-17, 17:33

Lynn Eades If everything is cleaned up,... 18-07-17, 20:21

David Dunlop Colin. What do the circular... 19-07-17, 02:22

colin jones The other side :) 19-07-17, 03:52

Chris Collins Colin, whats the plan with... 19-07-17, 04:06

PaperClip

colin jones Sorry David, I was just being... 19-07-17, 04:22

Chris Collins Fair enough, especially if... 19-07-17, 05:30

David Dunlop Not a problem, Colin. The... 19-07-17, 05:59

PaperClip

colin jones David, unfortunately very... 19-07-17, 07:48

Ryan For your viewing pleasure... 20-07-17, 04:23

PaperClip

lynx42 Hi Colin, Don't you ever... 20-07-17, 07:13

PaperClip

colin jones Thanks Ryan, they were... 20-07-17, 10:51

PaperClip

colin jones The rear bogie system is... 20-07-17, 10:59

Mike K colours 22-07-17, 08:40

PaperClip

colin jones Mike, thanks for the info.... 27-07-17, 06:40

PaperClip

colin jones All suspension parts are... 27-07-17, 06:47

More replies below current depth...

Richard Farrant Hi Colin, I see you are... 17-10-16, 10:32

colin jones Hi Richard, I'm curious here.... 21-02-17, 06:01

Richard Farrant Hi Colin, That information... 21-02-17, 09:52

More replies below current depth...

Prev

Previous Post

Next Post

Next

#30

Old

20-07-17, 07:13

lynx42

lynx42 is online now

Rick Cove

Join Date: Jan 2007

Location: Paynesville, AUSTRALIA

Posts: 1,866

Default

Hi Colin,

Don't you ever sleep??

Here is a photo of one at the Bovington which I had a good look at when we were there in 2009.

england4 393.jpg

Regards Rick.

__________________
1916 Albion A10
1942 White Scoutcar
1940 Chev Staff Car
1940 F30S Cab11
1940 Chev WA LRDG "Te Hai"
1941 F60L Cab12
1943 Ford Lynx
1942 Bren Gun Carrier VR no.2250
Humber FV1601A
Saracen Mk1(?)
25pdr. 1940 Weir No.266
25pdr. Australian Short No.185 (?)
KVE Member.

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Door Resto	Barry Churcher	The Restoration Forum	13	15-05-22 15:36
FAT cab 13 No 9 resto	Mrs Vampire	The Softskin Forum	27	29-09-21 06:11
C15A resto	harrygrey382	The Restoration Forum	9	08-06-15 09:40
another CAN m37 resto	Steve Wilson	The Restoration Forum	11	25-08-12 15:57
m 37 resto in new brunswick	pauljboudreau	Post-war Military Vehicles	118	07-03-11 22:29

All times are GMT +2. The time now is 13:57.