How To: C15a Wire-3 restoration

[Jordan Baker]

I managed to use the original footman loops that were on the box as well. I also picked up a supply of NOS ones from a dealer in the states thanks to Ebay. They matched my originals perfectly. Im using NOS woodscrews as the originals were too far gone. Its times like this that Im glad I pickup old jars of screws from people. Sometimes this older stuff comes in handy considering the slotted stuff is getting harder to find.

I also moved the WS19 into the truck. More right now just to get it out of the way. I still need to go through it and give it a good dusting and cleaning up. Plus I need to get some new shocks mounts for it.

Lastly I got the box to frame threaded rods I needed from a local shop. I figured I should do the usual POR15 and paint thing on them. So today I sandblasted them and POR'd them and then while the POR was still a bit tacky I spray painted on the final top coat. Ive done this a few times and it works really well. The paint seems to get bonded to the almost cured POR and makes it very tough.