Lower Rad Hose

[rob love]

I am back to working on the 2VP carrier, and after Lynn had expressed some concern about the length of these hoses on another thread here: http://www.mapleleafup.net/forums/sh...highlight=hose I was having doubts if these hoses were the solution. Happy to report that they are going to work out just fine. They could be an inch or two longer, but as they are, there is just enough rubber onto the tubes to make the required connections.

In the photo you can also see the results of long term outdoor storage on the floor of the carrier. Hopefully after all this work the unit will store it inside now.