![]() |
|
#1
|
|||
|
|||
![]()
Mod 1 would normally be Modification 1.
Post some pictures so we can see. |
#2
|
||||
|
||||
![]()
and I'll be corrected here...that was likely the conversion to 24 v..
__________________
Charles Fitton Maryhill On., Canada too many carriers too many rovers not enough time. (and now a BSA...) (and now a Triumph TRW...) |
#3
|
|||
|
|||
![]()
IMG_20180417_205931.jpgIMG_20180417_211141.jpg the side and the control box
__________________
Jason Dixon Cambridge, Ontario 1942 Willys MB CDLV 505 |
#4
|
|||
|
|||
![]()
__________________
Jason Dixon Cambridge, Ontario 1942 Willys MB CDLV 505 |
#5
|
||||
|
||||
![]()
I have an OM + M Mk1 which I am currently trying to resurrect / rebuild. Can anyone advise how to safely remove the field coils from the crank ? I need to remove the crank to do a thorough job and replace the ball bearing in the case, which is fuggered
![]() I have tried to upload a picture, but as I am using an apple device, the forum won't allow it
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). Last edited by RichardT10829; 27-11-18 at 12:00. |
#6
|
||||
|
||||
![]()
It’s ok, I managed
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration). |
![]() |
|
|