|
|
|
|
#1
05-10-18, 23:39
|
|||
|
|||
try the dimension for a search...
Hi Harry
Was at a seal wholesaler today and they still prefer to search by OD/ID since numbers vary from manufacturer and over time..... once found they give you a choice of made by 'who' where (time) and/ or shipping cost. You can probably figure out the ID easy enough but it will be a hell of a tight fit to measure the OD without taking your T case out.... Any body on the forum that has a 2 speed already taken apart for measuring.... I would suspect that the size for the two rods on the 2 speed and the one speed T case are the same...... need some time to read and compare in the parts manual.......... Mine where tight when I rebuilt my t case...... one of the few parts I did not have to change. Good luck
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada 
|
|
#2
06-10-18, 00:20
|
|||
|
|||
|
|
|
#3
06-10-18, 09:08
|
||||
|
||||
|
Seal part number lookup
Harry, if you can measure the shaft diameter and bore, go to http://www2.chicago-rawhide.com/ and click on "Seals North America Part Lookup".
Entering the ID and OD will give you a match from the current SKF seal catalogue, which in turn can be crossmatched to other manufacturers. HTH, Hanno Quote:
__________________
Regards, Hanno --------------------------
|
|
#4
12-10-18, 00:00
|
|||
|
|||
|
oil/grease seals ........
Front brake drum.....C8, HUP C15A possibly others.....
SKF brand new..... part number 45150...... easy stock item at baring suppliers Price as of Oct 2018 IN OTTAWA...... $136.39 INCLUDING TAX Bob C
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
 |
|
|
Hybrid Mode
