Wanted: CMP CAB#13 parts

David Johnston · #1 27-01-19, 21:17

Hey guys! I’m a newbie when it comes to CMP’s but I recently purchased a C15A

I’m from Ontario Canada, I’m now trying to hunt down some cab parts like doors, doghouse etc.. Is there anyone out there that can steer me in the right direction for some decent used parts?

I quickly figured out these are much more rare than my M37’s so I would greatly appreciate any help at all. I’m a serious buyer.

Thanks in advance!

Bob Carriere · #2 27-01-19, 21:49

Where are you located in Ontario....location can make a big difference.

...and pictures as a lot of us are illiterate..... lots of pictures....

will try to help you out as best we can...... lots of knowledgeable members on the forum.

What are your plans?? How much do you need???? How rich are you?? do you have a good looking sister??.

Mark April 6th on your calendar for the flea market in Georgetown.

Hope to cross path in the future.

Bob C

David Johnston · #3 27-01-19, 22:04

I’m in Port Colborne, I’m willing to travel when it comes to parts!

Thanks for the heads up in regards to the swap meet! I will be there for sure.
Thank Bob!

Bob Carriere · #4 27-01-19, 22:20

Lots of members and parts in the GTO area.

Now where are the Pictures????

David Johnston · #5 27-01-19, 22:39

Pics coming soon!!........ don’t laugh too hard!!😬

David Johnston · #6 28-01-19, 01:30

First time on the forum, wasn’t able to upload any pics...tried a couple times but came up as an error each time.😐

Bob Carriere · #7 28-01-19, 02:42

before you are allowed.....

How cold is it on port Colborne???

David Johnston · #8 28-01-19, 02:57

Ok got it!! Better keep yaking I guess!

It’s -13C here now, took awhile to get here but winter finally came!😐
What about Hammond?

Bob Carriere · #9 28-01-19, 03:04

....can't see the thermometer it is covered with a woolen scarf....

David Johnston · #10 28-01-19, 03:25

Dang!! Must be freakin cold then!! 😂

David Johnston · #11 28-01-19, 03:35

Still no luck uploading pics!, try again tomorrow I guess.
Thanks Bob.

rob love · #12 28-01-19, 04:22

They are likely too large....run them on photo editor to under 1600 pixels in length or 1.5mb in size.

BCA · #13 28-01-19, 19:09

David,
Check your PM's for details on a long list of NOS CMP parts and manuals.
……. Brian

David Johnston · #14 29-01-19, 18:15

I’m such a newbie!!😳 My PM’s???
Sorry Brian. Thanks!

rob love · #15 29-01-19, 18:57

PM= Private message. If you go to the top right of this page you will see a blue Private Messages link. Click on that.

David Johnston · #16 29-01-19, 19:41

It’s showing 0 private messages.😐

BCA · #17 30-01-19, 00:32

I’ll send you a PM.

David Johnston · #18 30-01-19, 00:39

Thanks Brian, I just received the email.

BCA · #19 30-01-19, 21:34

David,
The email I sent you is going to you blindly through the MLU Personal Messages system : I do not know your actual email since is it protected by MLU. You need to respond to me. Then I can send you my list as an attachment to an email. All of this allows users of the Forum to keep spammers at bay and not openly reveal there email address for robots to harvest.
……. Brian

David Johnston · #20 28-04-19, 16:01

Hey guys sorry for the long silent period.
I’m hoping someone can tell me whether or not the front bumpers are the same on Chev and ford CMP’s with #13 cab??
Thanks in advance!

Bob Carriere · #21 28-04-19, 16:26

You are working on a C15a Chev....... you can buy a brand new piece of 5 inch C channelCORRECTION 6 INCH .....identical to original CMP bumper......have it cut to size and drill your own hole.

Do you have a chewed up bumper to copy from or is it missing completely??
Do you have the radiator guard.....?

Don't think we have seen your beast photograph yet.

Make a detailed list of what you are looking for..... a lot of us have spares.

Fair weather is just around the corner......don't dare say Spring is here has we had some snow flakes coming down yesterday.

Are you aware of the Lindsay and Sterling auto flea market this coming weekend.

Good luck

David Johnston · #22 28-04-19, 17:19

This is the CMP I recently purchased.

Click image for larger version

Name: 16567741-6CC5-464E-8474-4D0E559A9A3C.jpeg
Views: 6
Size: 130.9 KB
ID: 107103

Name: 862D05C9-A227-47FB-882A-0FA7BF84A5A3.jpeg
Views: 155
Size: 27.8 KB

Name: B2FA47F9-E95C-420F-98C6-DC815CD9747B.jpeg
Views: 154
Size: 35.0 KB

Name: DDE03145-5BC5-46F6-9175-4C6350E2BC4F.jpeg
Views: 154
Size: 45.9 KB

Name: 126C10B9-3FFB-433E-AB42-C8D2CF52B5A7.jpeg
Views: 153
Size: 39.3 KB

Bruce Parker (RIP) · #23 28-04-19, 17:45

Not 6"??? 5" is for HUPs.

Quote:

Originally Posted by Bob Carriere

You are working on a C15a Chev....... you can buy a brand new piece of 5 inch C channel.....identical to original CMP bumper......have it cut to size and drill your own hole.

Do you have a chewed up bumper to copy from or is it missing completely??
Do you have the radiator guard.....?

Don't think we have seen your beast photograph yet.

Make a detailed list of what you are looking for..... a lot of us have spares.

Fair weather is just around the corner......don't dare say Spring is here has we had some snow flakes coming down yesterday.

Are you aware of the Lindsay and Sterling auto flea market this coming weekend.

Good luck

David Dunlop · #24 28-04-19, 20:56

Nice looking vehicle, David.

Is there a small, squarish metal patch top, right rear of the cab, to the right of the rear window? If so, you may have a cab and chassis assembly from a Wireless Truck.

David

David Johnston · #25 29-04-19, 00:03

Thanks David, Yes you are correct, the ID tag says the model is a C15A-WIRE-5. I’m not clear on the primary purpose for a wire truck though!😊
I am very pleased with the condition, spent most of its life in a airplane hanger in Winnipeg. It’s been robbed of a few parts though so I’m looking for:
Complete front bumper with the rad guard.
Complete doghouse
Rear window trim piece.
So if anyone could help me out it would be greatly appreciated!
Thanks.

Grant Bowker · #26 29-04-19, 00:14

For your engine cover - how are your sheet metal skills?
Phil Waterman has been kind enough to post drawings of the Cab 13 Chevrolet engine cover at https://www.canadianmilitarypattern....20Drawings.htm

Jordan Baker · #27 29-04-19, 00:21

Hi David.

Welcome to the CMP club. There are a few of us working on C15a’s in the area.

This is Robert Bergeron’s Wire-5 truck. Wire is just short form for wireless.

David Johnston · #28 29-04-19, 01:29

Thanks Grant,Jordan and all who are filling in the blanks for me.😊
Great stuff! Anyone with a bumper, rad guard and rear window trim I will gladly buy them knowing it would be more of a huge favor rather than a money thing.
Thanks All!

Barry Churcher · #29 29-04-19, 01:59

David, I should have bumper, engine cover and rad guard. Send me a PM and I can have a look.
Cheers,
Barry

John Winfield · #30 30-04-19, 06:41

Is this the window trim you're looking for?

This is on the roof that got hit by a tree - the piece is a little twisted and there is some rust, but could probably be straightened and used.

It's yours if you want it, but you'll probably have to drill out the screws.

I'm in Fort Erie.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
*For Sale:* Iltis and MV willys parts, M60 cradle and .50 parts etc	garmack	For Sale Or Wanted	6	13-04-12 01:32
TRADE; 2X Original Ford CMP parts manuals for Willys MB Spare parts list M440-W101	Jean	For Sale Or Wanted	0	14-07-08 02:57
Parts....switches and other CMP UC parts....	Bob Carriere	Auction and Classified Ad Site Heads Up	4	23-03-08 04:17
FOR TRADE, CMP FORD ill. army parts cat + sp. parts list F60 FOR Cdn MB parts list	Jean	For Sale Or Wanted	0	26-08-06 22:32