The Snakes Alive CMP Wiring Project

[Jacques Reed]

Hi Keith,

Thanks again for your help.

Here is a revised cowl wiring diagram based on the diagram and photos you supplied which may be of help to others. It shows the corrected entry of the various ring and fork terminals on the terminal block.

I made the turn signal wires an extra 4" longer than the side light harness wires to avoid wrong connections. Yellow is the colour for the sidelights and for Falk turn signals front left side.

As previously mentioned, the lengths for the side light and headlight wires are correct as per my original sample. The wire lengths for the dip switch harness are my best estimate. If anyone has an original harness for the dip switch I will gladly revise my wire lengths if they are different.

Cheers,