|
|
|
|
#1
06-11-19, 08:28
|
|||
|
|||
mystery washers
If I'm not mistaken those mystery washers will be located under the front securing clamps that you mentioned. They put some tension on the clamp to prevent it from working loose over time.
|
|
#2
12-11-19, 23:44
|
|||
|
|||
|
C42 info for m38
Hello Ian
There are some photos and information on the c42 in m38/m38a1 in: Wanted: Canadian Manual for C42/C45 Installation in M38A1 The tray replaced the earlier mount which was bolted to the fender directly. Thanks Eric
__________________
Collecting data on the WW2 Canadian jeep and trailer. Serial, WD Numbers etc.
|
|
#3
13-11-19, 00:04
|
|||
|
|||
|
Those large mounting trays are what I remember in the M38A1s back in the late 70s when I joined.
Those washers are, I believe, called a thackery washer. Seems to me there are some located on the top and bottom trays of the radio set on those brackets that lock the transmitter and power supply unit into place. I have some of the original mounting brackets out in the shed waiting for a suitable project. I also have a couple of C42 sets waiting for the same.
|
 |
|
|
Hybrid Mode
