Calling Rob Love or others with info... Jeep F-head engine

[Bob Carriere]

Rob

You picture with the wire location is DIFFERENT..........

The answer is probably right there.......

I worked with the dizzy cap with the plug wires still on and never questioned their location as that is how, presumably they wereleft by the owner when he took them off the old engine.

In a nut shell.....my number one wire is where you have the number 4 and my number 4 is where the number one appears on your picture.......

We have been trying to start it 180 degrees out of sync........

Even the photograph of the dizzy he took as he was taking it apart shows the 180 out of sequence....... we have been setting the BTDC on the exhaust stroke.......

Will pull out the dizzy....turnt he engine to BTDC and re insert the dizzy whcih should index in the same position you showed in your picture.

Then find a hammer and take turns hitting ourselves over the head to the tune of the roaring engine.

How you a large beer and St Hubert chicken........