M37 Restoration (53-41242) - MLU FORUM

MLU FORUM

		MLU FORUM > MILITARY VEHICLES > Post-war Military Vehicles
M37 Restoration (53-41242)

PaperClip

Wayne Hingley M37 Restoration (53-41242) 02-10-17, 21:32

rob love Interesting...no signs of... 02-10-17, 21:51

Wayne Hingley Paint 02-10-17, 22:05

PaperClip

Wayne Hingley Something followed me home... 04-10-17, 05:12

PaperClip

Wayne Hingley The truck was sunk into the... 04-10-17, 05:20

chris vickery Looks great Wayne! A bit of a... 04-10-17, 12:30

Wayne Hingley Unfortunately, yes. There... 05-10-17, 05:33

Wayne Hingley Good info on the bead clips... 05-10-17, 06:14

rob love Check with John Bizal at... 05-10-17, 08:07

Wayne Hingley Thanks Rob. That's a great... 05-10-17, 14:29

rob love The same harness is also... 05-10-17, 14:49

maple_leaf_eh Wiring - I like Rob's idea... 05-10-17, 16:35

rob love The numbering is fairly... 05-10-17, 16:40

Jes Andersen Wiring Harness 05-10-17, 17:27

PaperClip

Wayne Hingley I had some time today to... 16-10-17, 04:57

Jes Andersen Looks pretty good all cleaned... 16-10-17, 06:23

PaperClip

Wayne Hingley Hi Jes; I have a battery box... 16-10-17, 13:47

rob love You can patch the hole or... 16-10-17, 14:05

Wayne Hingley Good point Rob. I didn't... 16-10-17, 17:47

Jes Andersen I think the bracket you are... 16-10-17, 19:29

Wayne Hingley Thanks, Ill send you a PM on... 16-10-17, 22:59

PaperClip

Wayne Hingley Engine area cleaned up fairly... 20-10-17, 05:49

PaperClip

Wayne Hingley Merry Christmas! Thanks for... 22-12-17, 16:56

Jerry.Steber Nice Truck 26-12-17, 22:52

Wayne Hingley I guess Ill need my BIG... 26-12-17, 23:06

PaperClip

Wayne Hingley 41242 finally made its way... 29-10-18, 03:02

PaperClip

Wayne Hingley My goal this evening was to... 04-11-18, 03:39

PaperClip

Wayne Hingley A bit more tear-down today. A... 06-01-19, 05:13

PaperClip

Wayne Hingley Fuel tank 06-01-19, 05:35

Alex van de Wetering Wayne, Your work on the... 06-01-19, 11:56

Wayne Hingley Tank prep 06-01-19, 17:32

Alex van de Wetering Thanks Wayne for the extra... 09-01-19, 23:57

Bob Carriere How bad is your tank Alex??? 10-01-19, 00:49

PaperClip

Wayne Hingley Under the headlights 19-02-19, 04:24

Peter Phillips Looking good Wayne! I've used... 02-03-19, 01:25

Matthew P In that lower right photo if... 02-03-19, 05:07

PaperClip

Wayne Hingley A little less yellow... 08-08-19, 06:05

PaperClip

Wayne Hingley Micky Mouse 09-08-19, 00:13

PaperClip

Wayne Hingley Some primer going on today in... 01-09-19, 22:38

PaperClip

Wayne Hingley The mounting plates under... 04-09-19, 05:30

PaperClip

Wayne Hingley headliner 04-09-19, 06:07

PaperClip

Wayne Hingley Going back together... 04-09-19, 06:10

super dave Looks Good :) 04-09-19, 08:51

Peter Phillips You're a master of metal my... 13-09-19, 17:01

Wayne Hingley Not quite Pete... Im able to... 13-09-19, 17:44

PaperClip

Wayne Hingley More primer and paint this... 06-10-19, 05:30

PaperClip

Wayne Hingley Continued priming and... 16-10-19, 00:57

PaperClip

Wayne Hingley I don't know what was used as... 16-10-19, 01:04

Peter Phillips That seam sealer stuff is a... 20-10-19, 17:39

PaperClip

Wayne Hingley Seam Sealer 20-10-19, 18:30

PaperClip

Wayne Hingley If anyone is looking to... 24-10-19, 05:23

PaperClip

Eric B Black Watch M37 30-10-19, 01:02

PaperClip

Wayne Hingley Great photos 30-10-19, 02:28

PaperClip

Wayne Hingley Finished with painting for... 16-02-20, 00:43

Bob Carriere Nice job...... 16-02-20, 17:28

Wayne Hingley Good point Bob... another... 16-02-20, 20:02

PaperClip

Wayne Hingley Separation 17-02-20, 19:52

SteveJ Hey Wayne did you do your... 17-02-20, 22:53

rob love And add to that statement... 17-02-20, 23:03

Wayne Hingley Yes, I don't expect that I... 18-02-20, 00:53

PaperClip

Wayne Hingley Wires 18-02-20, 01:25

PaperClip

Wayne Hingley Engine & Trans 23-02-20, 20:29

PaperClip

Wayne Hingley Hole-tunnel 26-02-20, 08:18

PaperClip

Wayne Hingley This is what the holes in the... 26-02-20, 08:24

More replies below current depth...

PaperClip

Dan Martel Wayne, Sorry for the late... 06-06-20, 16:28

Wayne Hingley Thank you Dan! 06-06-20, 17:24

Rob Crombie Looks good. I had the same... 06-06-20, 22:57

PaperClip

Wayne Hingley With a makeshift rotisserie,... 15-06-20, 01:42

David Herbert I like the rotisserie, a nice... 15-06-20, 11:37

PaperClip

Wayne Hingley I was working under the... 15-06-20, 16:08

David Dunlop Great alternate use for a... 15-06-20, 16:19

rob love Not a cargo tarp, but a... 15-06-20, 16:37

PaperClip

super dave So you are probably going to... 18-06-20, 05:23

Wayne Hingley I think your right... 18-06-20, 06:12

PaperClip

Wayne Hingley My outdoor painting has been... 18-06-20, 06:54

Lynn Eades Dave, excuse my ignorance,... 18-06-20, 22:58

Wayne Hingley Hi Lynn, I think its the... 18-06-20, 23:51

Lynn Eades Thanks Wayne. I was easily... 19-06-20, 04:36

Peter Phillips That is coming along nicely... 27-06-20, 19:06

Clint Tauber They come apart easily, on... 27-06-20, 19:53

Phil Waterman You raise an interesting point 28-06-20, 00:24

PaperClip

Wayne Hingley Thanks to the handy work of... 08-07-20, 07:13

PaperClip

Wayne Hingley Differentials, transfer case... 08-07-20, 07:33

BCA Serial number 08-07-20, 15:33

PaperClip

Wayne Hingley Hi Brian. Yes the s/n was... 08-07-20, 15:40

chris vickery Isn’t the tire supposed to go... 08-07-20, 16:00

rob love Sorry to be critical, but I... 08-07-20, 17:04

David Herbert I am sorry Wayne but I agree... 08-07-20, 18:34

Wayne Hingley I don't disagree gentlemen. ... 08-07-20, 19:52

David Herbert That sounds like a convincing... 08-07-20, 20:01

Bruce Parker (RIP) Find a second set of rims and... 08-07-20, 20:32

PaperClip

rob love A tire I would recommend for... 08-07-20, 21:17

Wayne Hingley Those do look to be a nice... 09-07-20, 06:43

Wayne Hingley Rob, if you get a chance post... 09-07-20, 07:01

PaperClip

Wayne Hingley A few hours of progress... 13-07-20, 06:39

PaperClip

Wayne Hingley Cab tub progress... Well the... 02-10-20, 04:32

Peter Phillips Looks fantastic Wayne! Hoping... 11-10-20, 18:23

PaperClip

Wayne Hingley Drop by anytime Pete. I’ve... 12-10-20, 22:03

PaperClip

Wayne Hingley I’m definitely not a sign... 17-10-20, 19:27

rob love Wayne Not bad for a first... 17-10-20, 20:19

PaperClip

Ed Storey Wayne, good job on the Arm of... 17-10-20, 22:42

rob love Well Wayne, compared to the 9... 17-10-20, 23:40

Wayne Hingley Great photo Ed! Thanks for... 18-10-20, 00:01

chris vickery When I’ve done painted... 18-10-20, 00:09

rob love Perhaps, maybe, you need to... 18-10-20, 01:32

PaperClip

Wayne Hingley With some touch-ups to... 19-10-20, 00:26

Dan Martel Looks good to me. Dan. 19-10-20, 00:33

PaperClip

Ed Storey M37CDN Markings 19-10-20, 02:35

David Dunlop Nice job, Wayne! Feels... 19-10-20, 02:59

Wayne Hingley Thanks David. Yes and no... ... 19-10-20, 03:03

Ed Storey CFR Plates 19-10-20, 03:26

rob love Wayne: Note the tables and... 19-10-20, 04:27

Wayne Hingley Yes, I was thinking about... 19-10-20, 04:50

Rob Crombie Markings 20-10-20, 05:42

PaperClip

Wayne Hingley Thanks Rob. That bit of color... 08-11-20, 23:26

PaperClip

Wayne Hingley The engine is back in the... 23-11-20, 06:31

PaperClip

Wayne Hingley A bit more progress tonight... 27-11-20, 05:29

super dave Looking really good, maybe... 27-11-20, 06:11

Wayne Hingley You are too busy working on... 27-11-20, 07:22

David Dunlop Nice progress, Wayne! ... 27-11-20, 07:42

Rob Crombie Looks great Wayne. The truck... 27-11-20, 13:14

Wayne Hingley Thanks David and Rob. I have... 27-11-20, 17:37

PaperClip

Wayne Hingley The dance floor is in place. ... 05-12-20, 04:49

Mike Cecil Wow! 05-12-20, 17:05

rob love In Western Canada (BC is the... 05-12-20, 18:06

Mike Cecil I should have remembered it... 05-12-20, 19:39

Wayne Hingley As Rob correctly points out,... 05-12-20, 20:17

rob love But at least one of those was... 05-12-20, 21:41

Wayne Hingley Yes, and I have to say that... 06-12-20, 00:09

PaperClip

Wayne Hingley Haven’t had as much time as I... 30-12-20, 02:20

David Dunlop WOW! She’s come a long... 30-12-20, 03:00

PaperClip

Wayne Hingley Thanks David. Another step... 31-12-20, 02:47

Bruce Parker (RIP) In my experience there are... 31-12-20, 04:33

Peter Phillips Looks great Wayne! I can't... 31-12-20, 17:13

Wayne Hingley I agree with you Bruce...... 01-01-21, 02:05

PaperClip

Wayne Hingley Two components that I left in... 06-01-21, 04:34

David Dunlop Nice little touches, Wayne! ... 06-01-21, 04:45

Peter Phillips Good call Wayne, they're only... 07-01-21, 01:03

Ed Storey M37CDN Restoration 07-01-21, 02:42

PaperClip

Wayne Hingley Thanks David, Pete and Ed for... 22-01-21, 17:34

Mike Cecil Great job 22-01-21, 18:14

Wayne Hingley hahaha... Yes, I take your... 22-01-21, 20:22

rob love I know one guy who has... 22-01-21, 20:57

Wayne Hingley The slippers are a great... 22-01-21, 21:22

PaperClip

Wayne Hingley By the look of the date stamp... 23-02-21, 06:02

super dave looking great, I will drop... 23-02-21, 07:48

James Y Wow, looks great love... 24-02-21, 04:05

Wayne Hingley Super Dave... anything for... 24-02-21, 06:10

PaperClip

Wayne Hingley In the process of... 04-03-21, 05:11

super dave Coming together quite nicely ... 04-03-21, 06:49

PaperClip

Wayne Hingley A little more complete on the... 07-03-21, 22:58

David Dunlop Looking nice, Wayne! David 07-03-21, 23:00

Mike Cecil Can only agree with David:... 08-03-21, 00:27

PaperClip

Wayne Hingley Vacuum wipers 09-03-21, 05:33

rob love The mud wasps are what... 09-03-21, 05:43

Wayne Hingley Your right Rob, this was an... 09-03-21, 05:55

PaperClip

Wayne Hingley I rebuilt and installed the... 15-03-21, 06:27

Peter Phillips Looks amazing Wayne, I'm... 15-03-21, 17:13

PaperClip

Wayne Hingley Last week after topping the... 01-04-21, 02:15

super dave I had that also when doing my... 02-04-21, 07:23

Wayne Hingley Yes, that's it Dave. Mine... 02-04-21, 16:25

Walde Libera Radiators 02-04-21, 22:06

Wayne Hingley Walde; I totally agree. 03-04-21, 04:41

chris vickery Never a restoration without a... 03-04-21, 15:05

PaperClip

Wayne Hingley I received my new radiator... 17-08-21, 05:23

David Dunlop Nice work-around, Wayne. ... 17-08-21, 05:36

PaperClip

Wayne Hingley I have also finished the side... 17-08-21, 05:38

Mike Cecil Looking great, Wayne. Very... 17-08-21, 16:16

Lynn Eades I have followed this thread.... 17-08-21, 23:26

Wayne Hingley Thanks for the comments... 18-08-21, 17:42

Peter Phillips Great looking rig... 20-08-21, 17:29

Wayne Hingley Thanks Pete. Im sure Ill... 23-08-21, 17:52

Marc Montgomery wow...beautiful! 12-09-21, 18:24

PaperClip

Wayne Hingley Long overdue update on... 09-10-23, 22:57

Mike Cecil Looking really good, Wayne.... 09-10-23, 23:20

David Dunlop Fantastic, Wayne! A result... 09-10-23, 23:36

PaperClip

Wayne Hingley Thanks gents. A few more... 09-10-23, 23:57

rob love Very nice Wayne. It's going... 10-10-23, 02:12

Mike K Trial M37 10-10-23, 10:26

PaperClip

Wayne Hingley That's some interesting... 11-10-23, 03:18

PaperClip

Wayne Hingley Ed: yes, my display of the... 19-10-20, 03:00

maple_leaf_eh I haven't seen frost shields... 04-10-17, 17:53

Jes Andersen Wayne, That looks like a... 04-10-17, 18:34

PaperClip

Wayne Hingley Terry; Yes it is nice to have... 05-10-17, 03:23

rob love The owner really seems to... 05-10-17, 04:10

More replies below current depth...

Prev

Previous Post

Next Post

Next

#11

Old

16-02-20, 17:28

Bob Carriere Bob Carriere is offline

Bob Carriere is offline

Moderator

Join Date: Mar 2003

Location: Hammond, Ontario

Posts: 5,259

Default

Nice job......

Never worry about the time line............ years from now you will still be tinkering on it to add some details.....besides until it is completely fully finished it keeps you from starting another vehicle....

Bob C

__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada

Reply With Quote

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
19 set restoration	universalgrl	The Wireless Forum	0	10-01-14 18:51
4.5 Restoration	James Shopland	The Gun Park	7	18-03-13 16:38
19 Set Restoration	Bruce Parker (RIP)	The Wireless Forum	3	07-09-12 08:46
Cab 12 7A2 FAT for restoration	Keith Webb	The Softskin Forum	1	03-04-07 13:20
F8 for restoration	david moore	The Softskin Forum	32	21-06-05 14:47

All times are GMT +2. The time now is 02:15.