WTB: a single antenna wire with plug on the end for the WS No.19

[Chris Suslowicz]

Originally Posted by David Dunlop

Hello Dan.

Are you referring to the coax cable running from the A-set plug on the front right of the set to the side of the Variometer? It has a right angle Pye Connector either end.

David

Looking at the single IWM photograph of the aerial setup, it has a 'B' set base on the right hand rear of the turret top (if not fitted there's a square blanking plate with 4 bolt heads visible on other photos), and an 'A' set base on the LH rear. I suspect (because nobody ever seems to photograph the radio fit) it's a standard tank turret install: variometer and aerial feeder No.4 to the right of the set, with a 'through the roof' fit to the aerial base mounting No.1 and Base No.10 on top of that, and on the left of the set aerial base No.9 on mounting No.1 with the aerial base protector fitted.

The Sherman or Grizzly installation kit will list all the aerial parts required.

Chris.