Lynx I MkIII purchase

[lynx42]

Originally Posted by Andrew Rowe

The Mk 1 is 12 spline and the Mk 2 Lynx axle is 16 splines. Lynx 1 is of a smaller diameter than Mk2. The axles from a C8A (maybe F8 as well ?)are the right length but are 10 spline. They have the correct flange thickness and 8 hole bolt up pattern.

r6eoet7apnyz.jpg

Andrew, Lynx 1 Mk's 1,11,111, and 111* all have 6 stud bolt set up not 8. The wheels are like those on the Chev HUP's. The tyre size is also unusual at 9.25" x 16. I am running 9.00X16 tyres as the others are not available.

Lynx continues 072.JPG

A bit of a difference in rolling circumference, but that shouldn't cause me too many problems.

Lynx Continues Tyres 025.JPG




I was luck to get my original gearbox. You will have a few blokes looking out for your new cast housings as I have had many enquiries re the gearbox availability.

Cheers Rick.