![]() |
#11
|
|||
|
|||
![]() Quote:
![]() There is indeed a gap between the chain drive case and the hole in the right side of the hull. I know from the crab manual (and I think also from the one Crab in Bovington), that this gap is supposed to be covered with steel blocks/plate, although I am not sure if all Crabs had this, or only later production ones. The chain box is also fixed on the outside of the hull through springs to an angle iron. This fixation is still present on the Overloon example, so I don't think the gear is pushed inwards. The flange you see in the pictures is a flage to connect to pieces of the chain drive box together, it's not supposed to be flush with the inside of the hull sidewall. The part of the chain case on the outside of the tank does shows some damage with the rearmost panel bent inwards. I always thought this was a result of the drive shaft snapping, but it could well be that this is indeed damage from projectiles. Quote:
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sherman V CT150503 at Trois-Rivières, Québec | luc désormeaux | The Armour Forum | 46 | 21-07-23 07:10 |
For Sale: REPRO - Sherman V (M4A4) Crab 1 and 2 - Service Instruction Manual | Tim Bell | For Sale Or Wanted | 3 | 04-09-20 13:30 |
Carrier damage to pavement? | Jim Burrill | The Carrier Forum | 13 | 11-09-15 05:10 |
Wanted: Flathead V8 'Crab' Distributor Cap | ajmac | For Sale Or Wanted | 0 | 04-03-12 22:15 |
Conger in Overloon, The Netherlands | Alex van de Wetering | The Carrier Forum | 2 | 14-01-04 15:45 |