The latter part of this morning was spent cleaning up the right and left side chassis rails, along with the rear rails and the two 8-Pin Socket Assemblies.
Just the lower chassis shelf to clean now, along with the two PA LOADING Coils. I have to think about the approach to that a bit. I have a suitable spray cleaner that can get in there and lift/float the greasy soot loose, and it is a water-soluble cleaner. The bit I am unsure of at the moment is how best to get the water rinse applied and wiped up.
If you look at the last photo posted today, inboard of the Tuning Capacitor at the left, and the Tube Shield on the right, you can clearly see the area of the lower chassis shelf where the greasy soot is still sitting and how thick it is. Two cleaning spray sessions are not out of the question yet!
David
|
12-12-20, 22:13
Similar Threads
Threaded Mode