How To: Ford CMP "Blitz" miscellany

[Jacques Reed]

Good Day,

Recently I sold some Ford CMP bumper brackets and the purchaser asked if I could provide dimensions of an original bumper with a view to fabricating one.

Attached is a drawing of the earlier version bumper with the hole for the reflector jewel which I supplied taken from an original on my truck.
This drawing may be of use to others.

Finding the steel may be the hardest part. That seems to be a unique profile when I checked my very old Bethlehem Steel handbook. No doubt a wider flange could be cut/ground down to replicate the original width flange, or a fabrication job with a bit of welding and grinding. The channel was rolled, and not folded, to that shape hence the square edge at the top and bottom of the bumper.

I have checked, and double checked, dimensions but if you use this drawing I recommend you check them yourself or use a wooden template first. To paraphrase a well used woodworking term: "Measure twice and drill once"

Hope this is of some interest.

Cheers,

[Ivo Rmoutil]

Hi
Thanks again for selling the bumper brackets and providing the drawings. It is made of HEA 160 profile.

[Jacques Reed]

Hi Ivo,

Very glad to see the finished product and my drawing was of use to you. Well done!

Cheers,

[Jacques Reed]

Good Day,

I have been a bit quiet on the restoration front lately. Seems since I reached my 70's last year the demands on my time has increased. No major medical problems for me but a few routine medical requirements often cut into the good available days to do something more enjoyable. The Covid crisis has also put more pressure on the available time. We have been doing a lot of baby sitting our grandkids to help out our son and daughter-in-law with their reduced income and longer working hours. Toddlers and workshops just don't mix however!

I did manage to knock up this dolly for my roof a month ago.
I got annoyed with it always being in the way, and by having it movable I can rearrange the shed as required. I can also store it above heavier things on the floor which gives me extra space and still be able to get to the items below if required.
It could also come in handy for transporting it as there is some repair work to be done to it, or to transport it if I can find a Sunshine roof. It fits nicely in the bed of my ute.

I had the old windscreen frame laying around and about $40 worth of 30mm RHS and bolts was all it took to fabricate it one weekend.

Money well spent to avoid aggravation!

Next project is a small spray booth for the same reason above.

Anyway, I am still around thankfully in these unsettling times.
Hope this is of some interest.

Cheers,

[gjamo]

Great idea Jacques.

[Ganmain Tony]

I reckon it would serve another purpose perfectly Jacques.

Modified (Shortened) Roofs could very accurately have the missing bit put back in using this.
It would hold the front and rear, at the correct position to reinstall the correct length of steel in the gap.

Very very handy bit of kit in a fabrication work shop.

[m606paz]

Hi Jacques
Your contributions are always welcome!
We always wait for your correct answers!
Thanks for sharing!
Regards!