1944 C-15A-Wire-5 Restoration

[Harry Moon]

Once I got all the walls up and started priming and painting I had finished up the lighting and fan wiring, choosing to use the lights out of my old box as I seemed to have more of it and it was a simpler lay out. Another less obvious reason was that this box had a set up that ran a wire up to the front wall and then part way down were it went into a hole in the wall that was a tube inside a frame channel to the underside of the truck. When I screwed the front panels in I failed to notice the factory had carefully screwed their fasteners in on the edge whereas I put them right down the centreline piercing the tube 4 times with my screws rendering it unusable as the screws distorted and blocked it from every attempt to feed a power wire through it. viva la difference as they say... probably not in this context though.
I also finished cleaning up the sliding door to the driver and while I didn't take any pictures I did put a couple of coats of 30478 paint on the roof. Made it to a couple of events with the truck too.