M38 and M38A1 Parts Numbers

[Les Fisher]

While I was in business we would find new parts numbers for items we wanted to buy from Napa or other local suppliers. This is the start of a list I have:

• M38A1 Transfer case shifter seal CR6203 or Napa 49675,
• Intermediate shaft bearing BCA J361644.
• Output shaft bearings, TIM 14132, TiIM 142276,
• front output shaft bearing NSK 6296CM,
• transmission input bearing NACHI 6208NR
• output bearing NSK 6307CM
• Rad hoses gates upper 2006S lower 20364
• Points CS725A,
• Condenser AL 868,
• Rotor AL104. AL means Autolite
• 1953 Front Hub Bearings cone SKF BR18590 Cup SKF BR18520

I hope this helps someone !

[charlie fitton]

Thx Les...I'm trying to compile this info...

[Les Fisher]

I have much more

[maple_leaf_eh]

Just to throw a wrench into the list, there were three distinctive contracts for M38A1s. The CDN 1 contract for example didn't have an especially good turn signal installed, which was updated in the late 1970s post-introduction when the CDN1 and 2 vehicles were brought to one standard. The CDN 3 vehicles were closer to the commercial CJ5s with larger brakes.

[Les Fisher]

Like I said I do have much more. I do have part lists for CDN 3s as well. For now I have just started off with M38 and A1s

[charlie fitton]

Originally Posted by Les Fisher

Like I said I do have much more. I do have part lists for CDN 3s as well. For now I have just started off with M38 and A1s

lets have it!