Chevrolet coolant condensor can

[Jordan Baker]

Otters mid way through production were fitted with the standard CMP can. Early Otters didn’t but a modification kit was released to fit the cans in them.

[David Herbert]

I agree with Rob, I think that is an American part number. The 'C' refers to the size of the drawing of the part, 'A' being the biggest. It does not indicate a manufacturer or a revision.

David

[Grant Bowker]

Thanks to Rob and David - I went and dug out some of the stash of blueprints I received from Alex Blair's collection to look at their numbering. One drawing in particular caught my eye...
Drawing number C-321587 originally issued on paper marked as the Army Engineering Design Branch, crossed out and stamped as the Directorate Of Vehicle Development, Q.M. G. Branch, Dept. of National Defence has a reference to GM part 5820086 and depicts a "Flange-Transmission-Drive-Shaft". This drawing is dated 5-2-47.
Definite proof that the format of "C-######" was used to number drawings within the AEDB and QMG Branch, including automotive parts.

A very quick check in several CMP and GM armoured vehicle manuals didn't find 5820086. Hopefully someone else will have better luck finding the application of GM part 5820086...

[Maurice Donckers]

to me it looks like a T 16 Carrier condenser can , maybe somebody can check a T16 out.

[Maurice Donckers]

I just checked it , and for sure it is T16

[Niels V]

Based on the drawing, it is actually not to difficult to recreate a condenser can with simple tools and small adjustments to the design

[Hanno Spoelstra]

Originally Posted by Niels V

Based on the drawing, it is actually not to difficult to recreate a condenser can with simple tools and small adjustments to the design

Cool little project, Niels!