![]() |
|
|
|
#1
|
|||
|
|||
|
in 2005 coming home on our first big freedom convoy I had on a set of 1100x20 on my C15A, we hit about 65 mph when we just had to pull out and pass an LSVW. Only time I ran the big tires on the C15A.
I regularly cruise at 50 mph (gps confirmed) in my C60L with 1100x20's with the 235 with Fentons. |
|
#2
|
|||
|
|||
|
Canada's Fighting Vehicles lists maximum speeds between 40 and 50 MPH. The maximums do vary within the same basic model (eg. C60) which I assume may be due to weight as to the best of my knowledge all C60 had the same power, gearing and tires.
|
|
#3
|
|||
|
|||
|
Quote:
Way more useable RPM with the 235 and a few MPH from the 1100 tires. |
|
#4
|
||||
|
||||
|
Very usable info, will digest and get back on this subject later
__________________
Regards, Hanno -------------------------- |
|
#5
|
|||
|
|||
|
Here is a simple 60mph chart Easy to figure out revs at any speed eg for 40mph just do the 4/6 calculation, for 55 do 5.5/6 and 35 do 3.5/6 etc.
When measuring the tire height do it from the ground to centre of the axle and double. This is your true radius and diameter. Last edited by Lang; 29-12-23 at 00:35. |
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| My truck | diegoarielb | The Restoration Forum | 10 | 03-05-14 00:47 |
| I got me a new Truck! | Howard | The Softskin Forum | 11 | 05-05-08 15:36 |
| New truck | Pete Ashby | The Softskin Forum | 5 | 10-08-06 23:53 |
| Truck ID Please | Bill Murray | The Softskin Forum | 37 | 31-07-05 19:41 |
| COE truck ID | nuyt | The Softskin Forum | 9 | 14-06-04 00:07 |