![]() |
|
#1
|
||||
|
||||
![]()
The mailman came through today . Received all the components to make another generator control panel .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis |
#2
|
|||
|
|||
![]()
What are the part numbers and source for those?
|
#3
|
||||
|
||||
![]()
The fuse holders are from scrounged obsolete fuse panels and the fuses are from the hardware store . I use a standard built 12 X 12 inch electrical box with a cover that opens to the right You then punch out the holes as needed .I will admit this control panel is the most challenging part of the generator system restoration . You will understand the wiring of all this when you get the nice enlarged diagram i sent you by mail yesterday . It’s not for the faint of heart so to speak , it is complicated .The little switch on the bottom right is just a standard flip switch . It ´s neat function is to source the power from the two battery banks to start a generator . You get twice the amperage for start up . Don’t forget to switch it off when not starting as the warning says «* on for starting only «* The normal position is «*off*» .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis |
#4
|
||||
|
||||
![]()
Scrounging fuse holder from old style fuse panels .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis |
#5
|
||||
|
||||
![]()
Currently working on making control panels . Have the Bakelite panels now . Had found the stove switches and fuse holders / brackets as previously said . This is what the control panel looks like on a software used in engraving . Something neat i had not noticed before is that the amperage of the fuses was engraved behind them on the panel . Makes sense . I did not know because i had always had a look at panels with fuses on them thus blocking the view .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis |
#6
|
||||
|
||||
![]()
Interestingly enough , our C-5 Canadian charging panels were controlled by stove like snap switches . The generator and battery control panel in the Wire -5 trucks used the same switches . They were common commercialy available parts in the 30s and 40s . With a little fiddling this one will become a control panel switch in the near future . Stay tuned .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis |
#7
|
||||
|
||||
![]()
Here is our first prototype generator control panel. Found real Balkelite sheats . My friend Yves C is working with hos homemade CNC machine cutter . Not bad for a first try i would say .
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 / 44 U.C. No-2 MKII* / 10 Cwt Cdn Brantford Coach & Body trailer / 94 LSVW / 84 Iltis |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wire Reel | James D Teel II | The Wireless Forum | 7 | 26-07-20 03:57 |
wire 5 box | jason meade | The Softskin Forum | 12 | 21-06-14 00:59 |
FOR SALE/TRADE: 1944 CHOREHORSE PROJECT for Signal Corps Wireless Power Unit Project | Alain | For Sale Or Wanted | 1 | 21-02-07 00:11 |