02-01-25, 01:26
|
|
Registered User
|
|
Join Date: Feb 2006
Location: Winnipeg, MB, Canada
Posts: 3,602
|
|
COIL, Aerial Tuning No. 2 A. ZA/CAN 4725
The installation of the grounding strap and lower right front panel bracket were pretty straight forward. The one thing to be wary of, however, is that over 80 years, the holes in the wooden case for the hardware have dried out and this results in slightly larger holes the hardware feels a bit sloppy in. I used a small square block of wood held against the face of each front panel bracket to keep the brackets square to the case at the hardware was tightened. this will ensure the holes in the brackets line up properly with the front panel hardware when that assembly gets reinstalled.
David
|
Similar Threads
Threaded Mode