Undoing a few odd changes on a MkII Dingo

[Richard Farrant]

Originally posted by rmgill

One of the issues is that there is no fuel tap atop the fuel tank. One of the angle iron pieces welded to the tank was bent sideways to support a component holding the fuel line. There's also a 90° elbow atop the fuel suction line rather than a banjo fitting running under the protective bracket.

What's the most correct form of Fuel Tap to fit here?

Ryan,

To get your Dingo correct, you have the wrong tank for a Mk2, you appear to have one for a Mk3.

The Mk2 tank does not have the fuel pick up mounted on top with the related flexible braided hose and tap. The top should be blank aside from the filler neck of course, and the tap is fitted halfway up the tank adjacent to the firewall / bulkhead, from here the fuel pipe goes through the bulkhead to a Zenith fuel filter bowl then to the pump.

regards,
Richard