C8A 1C11

[cmperry4]

OK, it's the wood blocks between the body and frame - if they are unique to the 1C11, then I suppose it was part of the redesign to improve the "creature comforts" along with the springs, rubber-mount transfer case, driveshaft brake, cabin liner, heater, extra lighting, etc.

Frantisek - more pictures?? If you can manage it, I would most appreciate a shot of the front bumper mounts - mine were torched off, so I will be needing to fabricate something.

Speaking of torched, I patched up the holes cut in the sides of my grill panel yesterday which had been pierced to allow a bodged-up winch mount to be hung on the front end. (I welded in a strip of steel, then faired it with solder.) Also in the process of cutting off a towbar that was welded to the rear frame. And one more piece welded-on junk to be cut off the front frame as well.