body sealer
I used the same material I got from the glass shop that I used on the gas tank brackets. About 2 inchs wide soft and wide enough that I ran it along the edge of the back and roof, lightly tapping with a hammer to cut to width, which also gave me the location of the bolt holes that I knocked out with a cut down 303 case.used the same stuff for the front clip to firewall posts, and again under the windshield mounting bracket. A 100 ft roll should do a whole truck with enough left for a few small items here and there. Now I remember it is also available at heavy truck outlets (Kenworth) for both gas tanks and glass.
|
03-11-03, 22:34
Threaded Mode