|
|
#11
12-01-07, 23:15
|
||||
|
||||
Here's a top view of the tilt frame. The channel is 3" x 1" outside measurement. It's 57.25" long and is made from 1/8" stock. The top plates are 2" x 3" and are welded on flush with the end of the channel then the end caps are welded on so the channel ends up being 57.5" long.
Last edited by cletrac (RIP); 18-02-08 at 22:39. 
|
|
|
Threaded Mode