|
|
#11
22-03-07, 03:00
|
||||
|
||||
There's a 1947 farm license plate on the box I recently hauled home so you can tell how long the farmer used it. He must have hauled a lot of rocks with it though judging by how badly the floor and sides are bent up.
Mike, the taillight bracket is made from 3/16" material. It's 4 3/4" wide; the horizontal flange is 4 3/4" and the vertical flange is 2". The bottom corners are 1" radius and the center of the bulb holes are 2 1/2" apart and 1" from the bottom. The bolt hole centers are 2 1/2" apart. The bolt hole centers in the box are 4 1/2" and 7" from the side of the box and 3 1/4" from the rear of the box. Do you have the measurements for the step that goes below the endgate?
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 Last edited by cletrac (RIP); 18-02-08 at 22:46. 
|
|
|
Threaded Mode