2007 at the Hammond Barn

[Bob Carriere]

....will try using thinned down shellac gasket compound...... leaving a few of the thinness shims and check the preload.....

Thanks for the advice....will keep you posted of our progress.

Right now I need one small compression spring for the ball detent for the hi/low speed.... so will need to cannibalize from another 2 speed...... seems that little lubrication gets to the top part of the T case and the spring gets very rusted and gummed up....... will try packing with some small amount of light grease....


Hang in there.

BooB