|
|
#11
17-07-07, 03:06
|
||||
|
||||
F8 frames
When I first came across those three F8s that were built on the same day I noticed that the frame on one had been cut on an angle and a different rear section welded on. Since then I've looked at all of them again and they're all cut exactly the same and welded back together. In the pic you can see the weld in behind the cab bracket at about a 45 degree angle. Any ideas on why this would be necessary?
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 Last edited by cletrac (RIP); 18-02-08 at 23:10. 
|
|
|
Threaded Mode