![]() |
|
|
|
#1
|
|||
|
|||
|
Quote:
In Spare Parts List for model C4/GS (Contract 294/23/S.6862 (Con. 23A9-Cat Ref.338) it is listed with part number C.9699 for the rear road springs. So it was for sure used post 1939 since the C4 was first made in 1942. Rolf |
|
#2
|
||||
|
||||
|
Thanks my friend, and I agree it looks to me as though it's an Ant by the front mudguard alone.
|
|
#3
|
|||
|
|||
|
Quote:
..............They are indeed the Tamiya LRDG wheels. They performed well for the first few years after I finished the model, about 15 years ago, but than cracks turned up. I also built a CS8 GS which is pictured on Mike Kelly's website, which has the same cracks. I have replacement resin wheels, but still haven't fitted them. Quote:
Quote:
Alex
__________________
Chevrolet C8 cab 11 FFW BSA Folding Bicycle |
|
#4
|
||||
|
||||
|
Maybe this info will help.
The numbers on a id-plate are: MCC, Cont no 23\6778 Chassis no 2202 04\WT 3446 Cat.Ref. no 337 WD. no no Body no 257 The id-plate is located on a metal black-out-plate for the window of the backdoor. Cheers, Arjan
__________________
Austin ten saloon, 1939 Austin ten utility truck, 1940 Dodge WC54, 1942 Ford F15A, 1944 BSA folding bike 10 cwt GS Trailer |
|
#5
|
|||
|
|||
|
Hi Guys,
that image of the WS truck is for certain a: Truck, 15cwt 4 x 2, Guy "Wireless-Ant", the following link will help identify certain points: http://www.military39-45.freeuk.com/update03/guy002.htm Cheers, Dave |
|
#6
|
||||
|
||||
|
Quote:
H.
__________________
Regards, Hanno -------------------------- |
|
#7
|
||||
|
||||
|
Quote:
Is there any place in Holland that is more than an hours drive away from anywhere else ! Mike
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad |
|
#8
|
|||
|
|||
|
The interior view that Cliff posted is a wireless set #3 mounted in a Leyland 6 wheel lorry. This is a very early photo. The WS#3 was first produced in 1934 and was quickly replaced by the WS9,11,19,etc family.
In the Morris Commercial, layout depended a bit on which radio system was used but there was a common element of what went where. For the WS11 all units were inline in carrier and mounted on fore and aft shelf on off side. Batteries were 2 12v@85ah or 4 6v units mounted one on each side of the operators seat. |
|
#9
|
||||
|
||||
|
The Best info on British, Canadian and Australian radios fitted in Jeeps, Trucks, Command Trucks, Trailers Ect, Is Wireless for the Warrior by Louis Meulstee. Vol 1 Wireless Sets No 1 Set to 88 Set. Radios and Equipment 1932 to 1945 & Vol 2 Standard Sets of WW2. Vol 1 Shows the inside of house body radio 1500Cwt Trucks and much more Vol 2 WW2 and post war Veh radio set ups, as some war time radios were used up untill the 1970s [ 19 Set ] We used them in the Army Cadet Force. They are not cheap to buy but are the Best for info. He has a good website, Type in google, [ wireless for the warrior ] and that should find it.
__________________
Keith |
|
#10
|
|||
|
|||
|
3 shots of the Morris wireless 15cwt
1. the nearest i can get to a interior at the moment, well it shows where they threw the kit 2. late body types in the ETO one in attendance with Bedford QLs cheers Les |
|
#11
|
||||
|
||||
|
Quote:
![]() H.
__________________
Regards, Hanno -------------------------- |
|
#12
|
||||
|
||||
|
I found a Fordson Van on the Internet. I send an e-mail, but haven't got a answer. Maybe the interior is the same.
![]() source: Shuttleworth Collection Same vehicle, other site ![]() Source: HighwayGold Photo Gallery ![]() source: http://www.geocities.com/britsatwar/transport.html Cheers, Arjan
__________________
Austin ten saloon, 1939 Austin ten utility truck, 1940 Dodge WC54, 1942 Ford F15A, 1944 BSA folding bike 10 cwt GS Trailer |
|
#13
|
||||
|
||||
|
Here's some pix Mike Timoshyk sent me that he took inside a wireless van at the Canadian War Museum. He didn't say but it looks like a 15 cwt.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2 |
|
#14
|
|||
|
|||
|
In WftW, page WS19-73 to -77 are the diagrams for the installation of various No. 19 sets in the 15 cwt truck. The illustrations show: No. 19HP in a Wireless house type, Mk.II and a No. 19 in a house type Mk.III, and a No. 19/19HP in a truck 15 cwt, 4x2, FFW.
The latter is a soft top vehicle. These illustrations show the mounting of the sets, but not the complete interior of the house. There is also an illustration of the aerial mountings on the Mk.III vehicle. Also, I recall there were other sets used in these trucks, but I can't remember what they were. Hope this helps. Ian Cooper |
![]() |
|
|