Track adjusting cam variations

[BCA]

I have 2 different track adjusting cams (both are unmarked). The size of the holes for the bar are different: one cam has 11/16" holes and the other has 7/8" holes. Obviously for different bars. Maybe a Canadian vs. T16 variation? There are 2 different cams listed for Canadian carriers: -B and -C versions: maybe they are different? Any comments on the diameter of the bar commonly used on Canadian Carrier cams?

[Colin Alford]

Brian,

Attached you should find images of a C01UC 100737 B and C01UC 100737 C the wide one is the "B" version. All of the Canadian ones I have handled seem to be marked as part of the casting process and some of the markings can be very faint.

I believe that the hole sizes are the same for all Canadian ones but i am not near them right now to be able to measure.

Colin

[BCA]

Colin,
thanks for the great photos. Mine have no markings. Maybe they are for T16. Still curious what the diameter for the rod is supposed to be. If you have a chance t check the hole size on your cams that would confirm the correct size for Canadian cam.... Brian

[Michael R.]

http://mapleleafup.net/forums/showpo...55&postcount=1

http://mapleleafup.net/forums/showpo...21&postcount=2

[Colin Alford]

Brian,

I will measure the holes but it will be a couple of days before I will be able to do it.

Colin

[Colin Alford]

Brian,

The hole sizes in both C01UC 100737 B and C01UC 100737 C are 11/16".

"C01UC 100735, Bar - 24" steel" is 5/8" in diameter so it is fairly loose in the holes on the Track Adjusting Cams but it fits well in "XCTL 103450, Spanner - #802 Mk1 - Track adjuster clamping bolt nut" and "C01UC 100731 - Wrench - wheel spindle nut box"

Colin