![]() |
#1
|
||||
|
||||
![]()
Hi all,
I am chasing a 2 position fuel valve for my C15A, is there a substitute around or does someone have a spare? John Stokes |
#2
|
|||
|
|||
![]()
John-
Don't remember the source off the top of my head but the fuel valve you are looking for is virtually identical to some that are commercially available. Try looking on line in heavy truck sources and marine parts. I found one a few years ago that was a dead match for the Chev CMP except for the handle and the length of the shaft. Both of these were easy to modify. Do you need a picture of the original valve or dimensions? Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#3
|
|||
|
|||
![]()
John,
As a last resort, try one out of an OZ Ex-Army Land Rover. These had duel fuel tanks and the tap is between them. It is easy to fit and doesn't look out of place. Rick
__________________
1916 Albion A10 1942 White Scoutcar 1940 Chev Staff Car 1940 F30S Cab11 1940 Chev WA LRDG "Te Hai" 1941 F60L Cab12 1943 Ford Lynx 1942 Bren Gun Carrier VR no.2250 Humber FV1601A Saracen Mk1(?) 25pdr. 1940 Weir No.266 25pdr. Australian Short No.185 (?) KVE Member. |
#4
|
||||
|
||||
![]()
Thanks Phill a picture and dimensions would be helpful.
|
#5
|
||||
|
||||
![]()
John I would have one if that's any help to you
Max |
#6
|
|||
|
|||
![]()
Here are pictures of the valve from my Pattern 12 C60L but is the same as on both HUP and Pat 13 C60S
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
#7
|
||||
|
||||
![]()
Dirk has them for sale (http://www.lwdparts.com/):
Quote:
__________________
Regards, Hanno -------------------------- |
![]() |
|
|