Boys Bracket Dimension

Jordan Baker · #1 01-01-11, 06:41

Hi everyone

Just wondering if someone can measure the distance from the top edge of the rear armour plate to the center of the two holes used to bolt the Boys rifle bracket.

See the picture for the two holes I'm talking about.

Thanks

kevin powles · #2 01-01-11, 12:28

hi jordan, I can measure them and let you know tomorrow, have you anymore pics of the mortar carrier you have pictured, if you have can you send them in an e-mail to kevinpowles@btinternet.com

thanks kevin.

Jordan Baker · #3 01-01-11, 16:27

Thanks Kevin

Those pics of the mortar carrier were all posted on this forum and I think its the one you bought from John Bizal.

Jordan Baker · #4 04-01-11, 01:45

Any luck on the hole dimensions?

kevin powles · #5 04-01-11, 11:06

hi, The distance down from the top to the centre of the bottom of the two holes is 10 1/8". The top hole has a rivet in it as it is a mortar carrier so cant measure spot on, The distance of the bottom hole centre from the left hand side is 19 7/8" but this includes the side armour thickness. If you have the bracket you can gauge the top hole, I have a bracket if you need the dimensions.

kevin.

Jordan Baker · #6 05-01-11, 02:35

Hi Kevin

Thanks. That was the hole I was after.