|
|
#2
18-08-11, 11:37
|
||||
|
||||
What type of radio? US, UK, Canadian... Need a little more information.
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481 
|
|
#4
19-08-11, 01:10
|
||||
|
||||
|
So you need (2) of the D rod sections, with possible spares. Some on Ebay at the moment, I also have some spares in the USA.
Lance http://www.ebay.com/itm/Wireless-Set...item2312eaa91c http://www.ebay.com/itm/Wireless-Set...item2312eaa695 http://www.ebay.com/itm/Wireless-Set...item2312eaa5ad http://www.ebay.com/itm/Wireless-Set...item2312eaa47a http://www.ebay.com/itm/Wireless-Set...item2312eaa34f
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481
|
|
#6
19-08-11, 08:42
|
||||
|
||||
|
easy to make
I had an original B set antenna section. It's made from copper plated steel tubing ..from memory 3/16" diam. but check that . There is only one section ...its around 20" long as the freq. is around 240 Mhz.
The tubing , on the end has a 1/2" long BA screw, cheese head , the head of which is soldered into the tubing.The screw goesinto the metal top of the rubber base I had a box full of NOS rubber B set bases ... around 50 ..All gone now to various collectors . MIKE
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#8
19-08-11, 13:51
|
||||
|
||||
|
antenna
If I was making one.. I would use a length of 3/16" brass rod and just turn down the end to 1/8" and put a thread on it with a die . It was painted in green OD anyway. No one will notice the difference ..it's just a thin tube after all
 BTW the coax lead from the 19 set to the B base is a tuned length ..it's worked out as a percentage of the wavelength . The B set was a useless thing in reality ... the crews hated the thing as it was more of a hinderance than anything.
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad
|
|
#9
19-08-11, 23:34
|
||||
|
||||
|
Ws
OK so you want a aerial rod "G" to go with your Aerial base No 9.... It is only 1 aerial section....Got it, glad we finally figured it out.. I have about 10 of those. I am out of the USA until October if you can wait?
Lance
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481
|
|
#11
20-08-11, 05:15
|
||||
|
||||
|
I need one of those aerial rods "G" too. Message me when you get back.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set 1940 Cab 11 C8 cab and chassis 1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun 1940 Cab 11 F15A w/ Chev rear ends 1941 Cab 12 F15A 1942-44 Cab 13 F15A x 5 1942 cab 13 F15A with 2B1 box 1943 cab 13 F15A with 2H1 box 1943 Cab 13 C8A HUP 1944 Cab 13 C15A with 2C1 box 1943 Cletrac M2 High Speed Tractor MkII Bren gun carrier chassis x 2
|
|
#13
21-08-11, 11:11
|
||||
|
||||
|
I had a full list of WS spares that I tried to sell before and sold about 50% of the stuff, I might put up another list when I am back in the states again.
Lance
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481
|
|
#14
23-08-11, 18:09
|
||||
|
||||
|
__________________
39 Austin 8 Tourer 42 Humber Heavy Utility 42 C15A Wireless Truck 43 Humber AC MK IV F133744 "Vandal" tri-owner 43 A27L Centaur MK III T185481
|
|
#15
23-08-11, 21:00
|
|||
|
|||
|
Dimensions to reproduce...
What is the exact lenght of the "B" aerial "G" rod......??
.... and do we have the part number or the lenght of the matched antenna cable that should be used.... Bob C.
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada
|
 |
|
|
Linear Mode
