|
|
#1
14-09-11, 20:33
|
||||
|
||||
Chev Master cylinder return spring
Guys I am looking for a Chev master cylinder return spring the one inside the master cylinder,Mine was almost gone to dust and a new one does not come with the rebuild kits, Any one have one or any ideas as to something that can be used?
Thanks jason
__________________
42 Slat grill 43 Ford gpw 44 C15A Wire 5 
|
|
#2
14-09-11, 22:38
|
|||
|
|||
|
Which Chev?
Hi Jason
If you are talking Chev CMP master cylinder spring. It is a standard 1939-1946+ Chevy part. If the bore on your master Cylinder is good then a many rebuild kit can be had from most parts houses. Try NAPA UP3 shows the master cylinder kit with spring. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#3
14-09-11, 23:08
|
||||
|
||||
|
Ok Phil, I just ordered a rebuild kit this afternoon from napa along with two wheel cylinders...I was very surprised with the cost of the large wheel cylinders as they were cheeper than 3/4 ones for my GPW.
For some reason I had it in my head that the spring dident come with the kits. Well one last thing to do, Now to try to round up a seat or more.
__________________
42 Slat grill 43 Ford gpw 44 C15A Wire 5
|
|
#4
16-09-11, 08:13
|
||||
|
||||
|
Wheel cylinders
I found this site by accident it is most informative on wheel cylinders.
This link is for the rear cylinders only but it has most WWii era brakes bits listed. http://www.nsn-now.com/Indexing/View...=2530007371894
|
 |
|
|
Linear Mode
